go.sys: copy files from syscall package to go.sys/{plan9,windows,unix}

This CL copies to each package of go.sys the files from syscall it will need.
Different directories have different files, but these:
        mkall.sh
        str.go
        syscall.go
        mksyscall.pl
        race.go
        race0.go
        syscall_test.go
are copied to all three.
No changes yet, these are just copies. They are not ready to use yet:
package names are wrong, for starters. But this clean copy will make
it easier to follow the changes as the packages are enabled.

LGTM=rsc
R=golang-codereviews, rsc
CC=golang-codereviews
https://golang.org/cl/126960043

windows/asm_windows_386.s

@@ -0,0 +1,7 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//
+// System calls for 386, Windows are implemented in ../runtime/syscall_windows.goc
+//

windows/asm_windows_amd64.s

@@ -0,0 +1,7 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//
+// System calls for amd64, Windows are implemented in ../runtime/syscall_windows.goc
+//

windows/dll_windows.go

@@ -0,0 +1,279 @@
+// Copyright 2011 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall
+
+import (
+	"sync"
+	"sync/atomic"
+	"unsafe"
+)
+
+// DLLError describes reasons for DLL load failures.
+type DLLError struct {
+	Err     error
+	ObjName string
+	Msg     string
+}
+
+func (e *DLLError) Error() string { return e.Msg }
+
+// Implemented in ../runtime/syscall_windows.goc.
+func Syscall(trap, nargs, a1, a2, a3 uintptr) (r1, r2 uintptr, err Errno)
+func Syscall6(trap, nargs, a1, a2, a3, a4, a5, a6 uintptr) (r1, r2 uintptr, err Errno)
+func Syscall9(trap, nargs, a1, a2, a3, a4, a5, a6, a7, a8, a9 uintptr) (r1, r2 uintptr, err Errno)
+func Syscall12(trap, nargs, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12 uintptr) (r1, r2 uintptr, err Errno)
+func Syscall15(trap, nargs, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12, a13, a14, a15 uintptr) (r1, r2 uintptr, err Errno)
+func loadlibrary(filename *uint16) (handle uintptr, err Errno)
+func getprocaddress(handle uintptr, procname *uint8) (proc uintptr, err Errno)
+
+// A DLL implements access to a single DLL.
+type DLL struct {
+	Name   string
+	Handle Handle
+}
+
+// LoadDLL loads DLL file into memory.
+func LoadDLL(name string) (dll *DLL, err error) {
+	namep, err := UTF16PtrFromString(name)
+	if err != nil {
+		return nil, err
+	}
+	h, e := loadlibrary(namep)
+	if e != 0 {
+		return nil, &DLLError{
+			Err:     e,
+			ObjName: name,
+			Msg:     "Failed to load " + name + ": " + e.Error(),
+		}
+	}
+	d := &DLL{
+		Name:   name,
+		Handle: Handle(h),
+	}
+	return d, nil
+}
+
+// MustLoadDLL is like LoadDLL but panics if load operation failes.
+func MustLoadDLL(name string) *DLL {
+	d, e := LoadDLL(name)
+	if e != nil {
+		panic(e)
+	}
+	return d
+}
+
+// FindProc searches DLL d for procedure named name and returns *Proc
+// if found. It returns an error if search fails.
+func (d *DLL) FindProc(name string) (proc *Proc, err error) {
+	namep, err := BytePtrFromString(name)
+	if err != nil {
+		return nil, err
+	}
+	a, e := getprocaddress(uintptr(d.Handle), namep)
+	if e != 0 {
+		return nil, &DLLError{
+			Err:     e,
+			ObjName: name,
+			Msg:     "Failed to find " + name + " procedure in " + d.Name + ": " + e.Error(),
+		}
+	}
+	p := &Proc{
+		Dll:  d,
+		Name: name,
+		addr: a,
+	}
+	return p, nil
+}
+
+// MustFindProc is like FindProc but panics if search fails.
+func (d *DLL) MustFindProc(name string) *Proc {
+	p, e := d.FindProc(name)
+	if e != nil {
+		panic(e)
+	}
+	return p
+}
+
+// Release unloads DLL d from memory.
+func (d *DLL) Release() (err error) {
+	return FreeLibrary(d.Handle)
+}
+
+// A Proc implements access to a procedure inside a DLL.
+type Proc struct {
+	Dll  *DLL
+	Name string
+	addr uintptr
+}
+
+// Addr returns the address of the procedure represented by p.
+// The return value can be passed to Syscall to run the procedure.
+func (p *Proc) Addr() uintptr {
+	return p.addr
+}
+
+// Call executes procedure p with arguments a. It will panic, if more then 15 arguments
+// are supplied.
+//
+// The returned error is always non-nil, constructed from the result of GetLastError.
+// Callers must inspect the primary return value to decide whether an error occurred
+// (according to the semantics of the specific function being called) before consulting
+// the error. The error will be guaranteed to contain syscall.Errno.
+func (p *Proc) Call(a ...uintptr) (r1, r2 uintptr, lastErr error) {
+	switch len(a) {
+	case 0:
+		return Syscall(p.Addr(), uintptr(len(a)), 0, 0, 0)
+	case 1:
+		return Syscall(p.Addr(), uintptr(len(a)), a[0], 0, 0)
+	case 2:
+		return Syscall(p.Addr(), uintptr(len(a)), a[0], a[1], 0)
+	case 3:
+		return Syscall(p.Addr(), uintptr(len(a)), a[0], a[1], a[2])
+	case 4:
+		return Syscall6(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], 0, 0)
+	case 5:
+		return Syscall6(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], 0)
+	case 6:
+		return Syscall6(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5])
+	case 7:
+		return Syscall9(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], 0, 0)
+	case 8:
+		return Syscall9(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], 0)
+	case 9:
+		return Syscall9(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8])
+	case 10:
+		return Syscall12(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9], 0, 0)
+	case 11:
+		return Syscall12(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9], a[10], 0)
+	case 12:
+		return Syscall12(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9], a[10], a[11])
+	case 13:
+		return Syscall15(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9], a[10], a[11], a[12], 0, 0)
+	case 14:
+		return Syscall15(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9], a[10], a[11], a[12], a[13], 0)
+	case 15:
+		return Syscall15(p.Addr(), uintptr(len(a)), a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9], a[10], a[11], a[12], a[13], a[14])
+	default:
+		panic("Call " + p.Name + " with too many arguments " + itoa(len(a)) + ".")
+	}
+	return
+}
+
+// A LazyDLL implements access to a single DLL.
+// It will delay the load of the DLL until the first
+// call to its Handle method or to one of its
+// LazyProc's Addr method.
+type LazyDLL struct {
+	mu   sync.Mutex
+	dll  *DLL // non nil once DLL is loaded
+	Name string
+}
+
+// Load loads DLL file d.Name into memory. It returns an error if fails.
+// Load will not try to load DLL, if it is already loaded into memory.
+func (d *LazyDLL) Load() error {
+	// Non-racy version of:
+	// if d.dll == nil {
+	if atomic.LoadPointer((*unsafe.Pointer)(unsafe.Pointer(&d.dll))) == nil {
+		d.mu.Lock()
+		defer d.mu.Unlock()
+		if d.dll == nil {
+			dll, e := LoadDLL(d.Name)
+			if e != nil {
+				return e
+			}
+			// Non-racy version of:
+			// d.dll = dll
+			atomic.StorePointer((*unsafe.Pointer)(unsafe.Pointer(&d.dll)), unsafe.Pointer(dll))
+		}
+	}
+	return nil
+}
+
+// mustLoad is like Load but panics if search fails.
+func (d *LazyDLL) mustLoad() {
+	e := d.Load()
+	if e != nil {
+		panic(e)
+	}
+}
+
+// Handle returns d's module handle.
+func (d *LazyDLL) Handle() uintptr {
+	d.mustLoad()
+	return uintptr(d.dll.Handle)
+}
+
+// NewProc returns a LazyProc for accessing the named procedure in the DLL d.
+func (d *LazyDLL) NewProc(name string) *LazyProc {
+	return &LazyProc{l: d, Name: name}
+}
+
+// NewLazyDLL creates new LazyDLL associated with DLL file.
+func NewLazyDLL(name string) *LazyDLL {
+	return &LazyDLL{Name: name}
+}
+
+// A LazyProc implements access to a procedure inside a LazyDLL.
+// It delays the lookup until the Addr method is called.
+type LazyProc struct {
+	mu   sync.Mutex
+	Name string
+	l    *LazyDLL
+	proc *Proc
+}
+
+// Find searches DLL for procedure named p.Name. It returns
+// an error if search fails. Find will not search procedure,
+// if it is already found and loaded into memory.
+func (p *LazyProc) Find() error {
+	// Non-racy version of:
+	// if p.proc == nil {
+	if atomic.LoadPointer((*unsafe.Pointer)(unsafe.Pointer(&p.proc))) == nil {
+		p.mu.Lock()
+		defer p.mu.Unlock()
+		if p.proc == nil {
+			e := p.l.Load()
+			if e != nil {
+				return e
+			}
+			proc, e := p.l.dll.FindProc(p.Name)
+			if e != nil {
+				return e
+			}
+			// Non-racy version of:
+			// p.proc = proc
+			atomic.StorePointer((*unsafe.Pointer)(unsafe.Pointer(&p.proc)), unsafe.Pointer(proc))
+		}
+	}
+	return nil
+}
+
+// mustFind is like Find but panics if search fails.
+func (p *LazyProc) mustFind() {
+	e := p.Find()
+	if e != nil {
+		panic(e)
+	}
+}
+
+// Addr returns the address of the procedure represented by p.
+// The return value can be passed to Syscall to run the procedure.
+func (p *LazyProc) Addr() uintptr {
+	p.mustFind()
+	return p.proc.Addr()
+}
+
+// Call executes procedure p with arguments a. It will panic, if more then 15 arguments
+// are supplied.
+//
+// The returned error is always non-nil, constructed from the result of GetLastError.
+// Callers must inspect the primary return value to decide whether an error occurred
+// (according to the semantics of the specific function being called) before consulting
+// the error. The error will be guaranteed to contain syscall.Errno.
+func (p *LazyProc) Call(a ...uintptr) (r1, r2 uintptr, lastErr error) {
+	p.mustFind()
+	return p.proc.Call(a...)
+}

windows/env_windows.go

@@ -0,0 +1,82 @@
+// Copyright 2010 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Windows environment variables.
+
+package syscall
+
+import (
+	"unicode/utf16"
+	"unsafe"
+)
+
+func Getenv(key string) (value string, found bool) {
+	keyp, err := UTF16PtrFromString(key)
+	if err != nil {
+		return "", false
+	}
+	b := make([]uint16, 100)
+	n, e := GetEnvironmentVariable(keyp, &b[0], uint32(len(b)))
+	if n == 0 && e == ERROR_ENVVAR_NOT_FOUND {
+		return "", false
+	}
+	if n > uint32(len(b)) {
+		b = make([]uint16, n)
+		n, e = GetEnvironmentVariable(keyp, &b[0], uint32(len(b)))
+		if n > uint32(len(b)) {
+			n = 0
+		}
+	}
+	return string(utf16.Decode(b[0:n])), true
+}
+
+func Setenv(key, value string) error {
+	v, err := UTF16PtrFromString(value)
+	if err != nil {
+		return err
+	}
+	keyp, err := UTF16PtrFromString(key)
+	if err != nil {
+		return err
+	}
+	e := SetEnvironmentVariable(keyp, v)
+	if e != nil {
+		return e
+	}
+	return nil
+}
+
+func Clearenv() {
+	for _, s := range Environ() {
+		// Environment variables can begin with =
+		// so start looking for the separator = at j=1.
+		// http://blogs.msdn.com/b/oldnewthing/archive/2010/05/06/10008132.aspx
+		for j := 1; j < len(s); j++ {
+			if s[j] == '=' {
+				Setenv(s[0:j], "")
+				break
+			}
+		}
+	}
+}
+
+func Environ() []string {
+	s, e := GetEnvironmentStrings()
+	if e != nil {
+		return nil
+	}
+	defer FreeEnvironmentStrings(s)
+	r := make([]string, 0, 50) // Empty with room to grow.
+	for from, i, p := 0, 0, (*[1 << 24]uint16)(unsafe.Pointer(s)); true; i++ {
+		if p[i] == 0 {
+			// empty string marks the end
+			if i <= from {
+				break
+			}
+			r = append(r, string(utf16.Decode(p[from:i])))
+			from = i + 1
+		}
+	}
+	return r
+}

windows/exec_windows.go

@@ -0,0 +1,341 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Fork, exec, wait, etc.
+
+package syscall
+
+import (
+	"sync"
+	"unicode/utf16"
+	"unsafe"
+)
+
+var ForkLock sync.RWMutex
+
+// EscapeArg rewrites command line argument s as prescribed
+// in http://msdn.microsoft.com/en-us/library/ms880421.
+// This function returns "" (2 double quotes) if s is empty.
+// Alternatively, these transformations are done:
+// - every back slash (\) is doubled, but only if immediately
+//   followed by double quote (");
+// - every double quote (") is escaped by back slash (\);
+// - finally, s is wrapped with double quotes (arg -> "arg"),
+//   but only if there is space or tab inside s.
+func EscapeArg(s string) string {
+	if len(s) == 0 {
+		return "\"\""
+	}
+	n := len(s)
+	hasSpace := false
+	for i := 0; i < len(s); i++ {
+		switch s[i] {
+		case '"', '\\':
+			n++
+		case ' ', '\t':
+			hasSpace = true
+		}
+	}
+	if hasSpace {
+		n += 2
+	}
+	if n == len(s) {
+		return s
+	}
+
+	qs := make([]byte, n)
+	j := 0
+	if hasSpace {
+		qs[j] = '"'
+		j++
+	}
+	slashes := 0
+	for i := 0; i < len(s); i++ {
+		switch s[i] {
+		default:
+			slashes = 0
+			qs[j] = s[i]
+		case '\\':
+			slashes++
+			qs[j] = s[i]
+		case '"':
+			for ; slashes > 0; slashes-- {
+				qs[j] = '\\'
+				j++
+			}
+			qs[j] = '\\'
+			j++
+			qs[j] = s[i]
+		}
+		j++
+	}
+	if hasSpace {
+		for ; slashes > 0; slashes-- {
+			qs[j] = '\\'
+			j++
+		}
+		qs[j] = '"'
+		j++
+	}
+	return string(qs[:j])
+}
+
+// makeCmdLine builds a command line out of args by escaping "special"
+// characters and joining the arguments with spaces.
+func makeCmdLine(args []string) string {
+	var s string
+	for _, v := range args {
+		if s != "" {
+			s += " "
+		}
+		s += EscapeArg(v)
+	}
+	return s
+}
+
+// createEnvBlock converts an array of environment strings into
+// the representation required by CreateProcess: a sequence of NUL
+// terminated strings followed by a nil.
+// Last bytes are two UCS-2 NULs, or four NUL bytes.
+func createEnvBlock(envv []string) *uint16 {
+	if len(envv) == 0 {
+		return &utf16.Encode([]rune("\x00\x00"))[0]
+	}
+	length := 0
+	for _, s := range envv {
+		length += len(s) + 1
+	}
+	length += 1
+
+	b := make([]byte, length)
+	i := 0
+	for _, s := range envv {
+		l := len(s)
+		copy(b[i:i+l], []byte(s))
+		copy(b[i+l:i+l+1], []byte{0})
+		i = i + l + 1
+	}
+	copy(b[i:i+1], []byte{0})
+
+	return &utf16.Encode([]rune(string(b)))[0]
+}
+
+func CloseOnExec(fd Handle) {
+	SetHandleInformation(Handle(fd), HANDLE_FLAG_INHERIT, 0)
+}
+
+func SetNonblock(fd Handle, nonblocking bool) (err error) {
+	return nil
+}
+
+// getFullPath retrieves the full path of the specified file.
+// Just a wrapper for Windows GetFullPathName api.
+func getFullPath(name string) (path string, err error) {
+	p, err := UTF16PtrFromString(name)
+	if err != nil {
+		return "", err
+	}
+	buf := make([]uint16, 100)
+	n, err := GetFullPathName(p, uint32(len(buf)), &buf[0], nil)
+	if err != nil {
+		return "", err
+	}
+	if n > uint32(len(buf)) {
+		// Windows is asking for bigger buffer.
+		buf = make([]uint16, n)
+		n, err = GetFullPathName(p, uint32(len(buf)), &buf[0], nil)
+		if err != nil {
+			return "", err
+		}
+		if n > uint32(len(buf)) {
+			return "", EINVAL
+		}
+	}
+	return UTF16ToString(buf[:n]), nil
+}
+
+func isSlash(c uint8) bool {
+	return c == '\\' || c == '/'
+}
+
+func normalizeDir(dir string) (name string, err error) {
+	ndir, err := getFullPath(dir)
+	if err != nil {
+		return "", err
+	}
+	if len(ndir) > 2 && isSlash(ndir[0]) && isSlash(ndir[1]) {
+		// dir cannot have \\server\share\path form
+		return "", EINVAL
+	}
+	return ndir, nil
+}
+
+func volToUpper(ch int) int {
+	if 'a' <= ch && ch <= 'z' {
+		ch += 'A' - 'a'
+	}
+	return ch
+}
+
+func joinExeDirAndFName(dir, p string) (name string, err error) {
+	if len(p) == 0 {
+		return "", EINVAL
+	}
+	if len(p) > 2 && isSlash(p[0]) && isSlash(p[1]) {
+		// \\server\share\path form
+		return p, nil
+	}
+	if len(p) > 1 && p[1] == ':' {
+		// has drive letter
+		if len(p) == 2 {
+			return "", EINVAL
+		}
+		if isSlash(p[2]) {
+			return p, nil
+		} else {
+			d, err := normalizeDir(dir)
+			if err != nil {
+				return "", err
+			}
+			if volToUpper(int(p[0])) == volToUpper(int(d[0])) {
+				return getFullPath(d + "\\" + p[2:])
+			} else {
+				return getFullPath(p)
+			}
+		}
+	} else {
+		// no drive letter
+		d, err := normalizeDir(dir)
+		if err != nil {
+			return "", err
+		}
+		if isSlash(p[0]) {
+			return getFullPath(d[:2] + p)
+		} else {
+			return getFullPath(d + "\\" + p)
+		}
+	}
+	// we shouldn't be here
+	return "", EINVAL
+}
+
+type ProcAttr struct {
+	Dir   string
+	Env   []string
+	Files []uintptr
+	Sys   *SysProcAttr
+}
+
+type SysProcAttr struct {
+	HideWindow    bool
+	CmdLine       string // used if non-empty, else the windows command line is built by escaping the arguments passed to StartProcess
+	CreationFlags uint32
+}
+
+var zeroProcAttr ProcAttr
+var zeroSysProcAttr SysProcAttr
+
+func StartProcess(argv0 string, argv []string, attr *ProcAttr) (pid int, handle uintptr, err error) {
+	if len(argv0) == 0 {
+		return 0, 0, EWINDOWS
+	}
+	if attr == nil {
+		attr = &zeroProcAttr
+	}
+	sys := attr.Sys
+	if sys == nil {
+		sys = &zeroSysProcAttr
+	}
+
+	if len(attr.Files) > 3 {
+		return 0, 0, EWINDOWS
+	}
+
+	if len(attr.Dir) != 0 {
+		// StartProcess assumes that argv0 is relative to attr.Dir,
+		// because it implies Chdir(attr.Dir) before executing argv0.
+		// Windows CreateProcess assumes the opposite: it looks for
+		// argv0 relative to the current directory, and, only once the new
+		// process is started, it does Chdir(attr.Dir). We are adjusting
+		// for that difference here by making argv0 absolute.
+		var err error
+		argv0, err = joinExeDirAndFName(attr.Dir, argv0)
+		if err != nil {
+			return 0, 0, err
+		}
+	}
+	argv0p, err := UTF16PtrFromString(argv0)
+	if err != nil {
+		return 0, 0, err
+	}
+
+	var cmdline string
+	// Windows CreateProcess takes the command line as a single string:
+	// use attr.CmdLine if set, else build the command line by escaping
+	// and joining each argument with spaces
+	if sys.CmdLine != "" {
+		cmdline = sys.CmdLine
+	} else {
+		cmdline = makeCmdLine(argv)
+	}
+
+	var argvp *uint16
+	if len(cmdline) != 0 {
+		argvp, err = UTF16PtrFromString(cmdline)
+		if err != nil {
+			return 0, 0, err
+		}
+	}
+
+	var dirp *uint16
+	if len(attr.Dir) != 0 {
+		dirp, err = UTF16PtrFromString(attr.Dir)
+		if err != nil {
+			return 0, 0, err
+		}
+	}
+
+	// Acquire the fork lock so that no other threads
+	// create new fds that are not yet close-on-exec
+	// before we fork.
+	ForkLock.Lock()
+	defer ForkLock.Unlock()
+
+	p, _ := GetCurrentProcess()
+	fd := make([]Handle, len(attr.Files))
+	for i := range attr.Files {
+		if attr.Files[i] > 0 {
+			err := DuplicateHandle(p, Handle(attr.Files[i]), p, &fd[i], 0, true, DUPLICATE_SAME_ACCESS)
+			if err != nil {
+				return 0, 0, err
+			}
+			defer CloseHandle(Handle(fd[i]))
+		}
+	}
+	si := new(StartupInfo)
+	si.Cb = uint32(unsafe.Sizeof(*si))
+	si.Flags = STARTF_USESTDHANDLES
+	if sys.HideWindow {
+		si.Flags |= STARTF_USESHOWWINDOW
+		si.ShowWindow = SW_HIDE
+	}
+	si.StdInput = fd[0]
+	si.StdOutput = fd[1]
+	si.StdErr = fd[2]
+
+	pi := new(ProcessInformation)
+
+	flags := sys.CreationFlags | CREATE_UNICODE_ENVIRONMENT
+	err = CreateProcess(argv0p, argvp, nil, nil, true, flags, createEnvBlock(attr.Env), dirp, si, pi)
+	if err != nil {
+		return 0, 0, err
+	}
+	defer CloseHandle(Handle(pi.Thread))
+
+	return int(pi.ProcessId), uintptr(pi.Process), nil
+}
+
+func Exec(argv0 string, argv []string, envv []string) (err error) {
+	return EWINDOWS
+}

windows/mkall.sh

@@ -0,0 +1,263 @@
+#!/usr/bin/env bash
+# Copyright 2009 The Go Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style
+# license that can be found in the LICENSE file.
+
+# The syscall package provides access to the raw system call
+# interface of the underlying operating system.  Porting Go to
+# a new architecture/operating system combination requires
+# some manual effort, though there are tools that automate
+# much of the process.  The auto-generated files have names
+# beginning with z.
+#
+# This script runs or (given -n) prints suggested commands to generate z files
+# for the current system.  Running those commands is not automatic.
+# This script is documentation more than anything else.
+#
+# * asm_${GOOS}_${GOARCH}.s
+#
+# This hand-written assembly file implements system call dispatch.
+# There are three entry points:
+#
+# 	func Syscall(trap, a1, a2, a3 uintptr) (r1, r2, err uintptr);
+# 	func Syscall6(trap, a1, a2, a3, a4, a5, a6 uintptr) (r1, r2, err uintptr);
+# 	func RawSyscall(trap, a1, a2, a3 uintptr) (r1, r2, err uintptr);
+#
+# The first and second are the standard ones; they differ only in
+# how many arguments can be passed to the kernel.
+# The third is for low-level use by the ForkExec wrapper;
+# unlike the first two, it does not call into the scheduler to
+# let it know that a system call is running.
+#
+# * syscall_${GOOS}.go
+#
+# This hand-written Go file implements system calls that need
+# special handling and lists "//sys" comments giving prototypes
+# for ones that can be auto-generated.  Mksyscall reads those
+# comments to generate the stubs.
+#
+# * syscall_${GOOS}_${GOARCH}.go
+#
+# Same as syscall_${GOOS}.go except that it contains code specific
+# to ${GOOS} on one particular architecture.
+#
+# * types_${GOOS}.c
+#
+# This hand-written C file includes standard C headers and then
+# creates typedef or enum names beginning with a dollar sign
+# (use of $ in variable names is a gcc extension).  The hardest
+# part about preparing this file is figuring out which headers to
+# include and which symbols need to be #defined to get the
+# actual data structures that pass through to the kernel system calls.
+# Some C libraries present alternate versions for binary compatibility
+# and translate them on the way in and out of system calls, but
+# there is almost always a #define that can get the real ones.
+# See types_darwin.c and types_linux.c for examples.
+#
+# * zerror_${GOOS}_${GOARCH}.go
+#
+# This machine-generated file defines the system's error numbers,
+# error strings, and signal numbers.  The generator is "mkerrors.sh".
+# Usually no arguments are needed, but mkerrors.sh will pass its
+# arguments on to godefs.
+#
+# * zsyscall_${GOOS}_${GOARCH}.go
+#
+# Generated by mksyscall.pl; see syscall_${GOOS}.go above.
+#
+# * zsysnum_${GOOS}_${GOARCH}.go
+#
+# Generated by mksysnum_${GOOS}.
+#
+# * ztypes_${GOOS}_${GOARCH}.go
+#
+# Generated by godefs; see types_${GOOS}.c above.
+
+GOOSARCH="${GOOS}_${GOARCH}"
+
+# defaults
+mksyscall="./mksyscall.pl"
+mkerrors="./mkerrors.sh"
+zerrors="zerrors_$GOOSARCH.go"
+mksysctl=""
+zsysctl="zsysctl_$GOOSARCH.go"
+mksysnum=
+mktypes=
+run="sh"
+
+case "$1" in
+-syscalls)
+	for i in zsyscall*go
+	do
+		sed 1q $i | sed 's;^// ;;' | sh > _$i && gofmt < _$i > $i
+		rm _$i
+	done
+	exit 0
+	;;
+-n)
+	run="cat"
+	shift
+esac
+
+case "$#" in
+0)
+	;;
+*)
+	echo 'usage: mkall.sh [-n]' 1>&2
+	exit 2
+esac
+
+case "$GOOSARCH" in
+_* | *_ | _)
+	echo 'undefined $GOOS_$GOARCH:' "$GOOSARCH" 1>&2
+	exit 1
+	;;
+darwin_386)
+	mkerrors="$mkerrors -m32"
+	mksyscall="./mksyscall.pl -l32"
+	mksysnum="./mksysnum_darwin.pl /usr/include/sys/syscall.h"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+darwin_amd64)
+	mkerrors="$mkerrors -m64"
+	mksysnum="./mksysnum_darwin.pl /usr/include/sys/syscall.h"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+dragonfly_386)
+	mkerrors="$mkerrors -m32"
+	mksyscall="./mksyscall.pl -l32 -dragonfly"
+	mksysnum="curl -s 'http://gitweb.dragonflybsd.org/dragonfly.git/blob_plain/HEAD:/sys/kern/syscalls.master' | ./mksysnum_dragonfly.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+dragonfly_amd64)
+	mkerrors="$mkerrors -m64"
+	mksyscall="./mksyscall.pl -dragonfly"
+	mksysnum="curl -s 'http://gitweb.dragonflybsd.org/dragonfly.git/blob_plain/HEAD:/sys/kern/syscalls.master' | ./mksysnum_dragonfly.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+freebsd_386)
+	mkerrors="$mkerrors -m32"
+	mksyscall="./mksyscall.pl -l32"
+	mksysnum="curl -s 'http://svn.freebsd.org/base/stable/10/sys/kern/syscalls.master' | ./mksysnum_freebsd.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+freebsd_amd64)
+	mkerrors="$mkerrors -m64"
+	mksysnum="curl -s 'http://svn.freebsd.org/base/stable/10/sys/kern/syscalls.master' | ./mksysnum_freebsd.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+freebsd_arm)
+	mkerrors="$mkerrors"
+	mksyscall="./mksyscall.pl -l32 -arm"
+	mksysnum="curl -s 'http://svn.freebsd.org/base/stable/10/sys/kern/syscalls.master' | ./mksysnum_freebsd.pl"
+	# Let the type of C char be singed for making the bare syscall
+	# API consistent across over platforms.
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
+	;;
+linux_386)
+	mkerrors="$mkerrors -m32"
+	mksyscall="./mksyscall.pl -l32"
+	mksysnum="./mksysnum_linux.pl /usr/include/asm/unistd_32.h"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+linux_amd64)
+	unistd_h=$(ls -1 /usr/include/asm/unistd_64.h /usr/include/x86_64-linux-gnu/asm/unistd_64.h 2>/dev/null | head -1)
+	if [ "$unistd_h" = "" ]; then
+		echo >&2 cannot find unistd_64.h
+		exit 1
+	fi
+	mkerrors="$mkerrors -m64"
+	mksysnum="./mksysnum_linux.pl $unistd_h"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+linux_arm)
+	mkerrors="$mkerrors"
+	mksyscall="./mksyscall.pl -l32 -arm"
+	mksysnum="curl -s 'http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/plain/arch/arm/include/uapi/asm/unistd.h' | ./mksysnum_linux.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+nacl_386)
+	mkerrors=""
+	mksyscall="./mksyscall.pl -l32 -nacl"
+	mksysnum=""
+	mktypes=""
+	;;
+nacl_amd64p32)
+	mkerrors=""
+	mksyscall="./mksyscall.pl -nacl"
+	mksysnum=""
+	mktypes=""
+	;;
+netbsd_386)
+	mkerrors="$mkerrors -m32"
+	mksyscall="./mksyscall.pl -l32 -netbsd"
+	mksysnum="curl -s 'http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/sys/kern/syscalls.master' | ./mksysnum_netbsd.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+netbsd_amd64)
+	mkerrors="$mkerrors -m64"
+	mksyscall="./mksyscall.pl -netbsd"
+	mksysnum="curl -s 'http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/sys/kern/syscalls.master' | ./mksysnum_netbsd.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+openbsd_386)
+	mkerrors="$mkerrors -m32"
+	mksyscall="./mksyscall.pl -l32 -openbsd"
+	mksysctl="./mksysctl_openbsd.pl"
+	zsysctl="zsysctl_openbsd.go"
+	mksysnum="curl -s 'http://www.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master' | ./mksysnum_openbsd.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+openbsd_amd64)
+	mkerrors="$mkerrors -m64"
+	mksyscall="./mksyscall.pl -openbsd"
+	mksysctl="./mksysctl_openbsd.pl"
+	zsysctl="zsysctl_openbsd.go"
+	mksysnum="curl -s 'http://www.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master' | ./mksysnum_openbsd.pl"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+plan9_386)
+	mkerrors=
+	mksyscall="./mksyscall.pl -l32 -plan9"
+	mksysnum="./mksysnum_plan9.sh /n/sources/plan9/sys/src/libc/9syscall/sys.h"
+	mktypes="XXX"
+	;;
+solaris_amd64)
+	mksyscall="./mksyscall_solaris.pl"
+	mkerrors="$mkerrors -m64"
+	mksysnum=
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
+	;;
+windows_*)
+	mksyscall=
+	mkerrors=
+	zerrors=
+	;;
+*)
+	echo 'unrecognized $GOOS_$GOARCH: ' "$GOOSARCH" 1>&2
+	exit 1
+	;;
+esac
+
+(
+	if [ -n "$mkerrors" ]; then echo "$mkerrors |gofmt >$zerrors"; fi
+	case "$GOOS" in
+	windows)
+		echo "GOOS= GOARCH= go build mksyscall_windows.go"
+		echo "./mksyscall_windows syscall_windows.go security_windows.go syscall_$GOOSARCH.go |gofmt >zsyscall_$GOOSARCH.go"
+		echo "rm -f ./mksyscall_windows"
+		;;
+	*)
+		syscall_goos="syscall_$GOOS.go"
+		case "$GOOS" in
+		darwin | dragonfly | freebsd | netbsd | openbsd)
+			syscall_goos="syscall_bsd.go $syscall_goos"
+			;;
+		esac
+		if [ -n "$mksyscall" ]; then echo "$mksyscall $syscall_goos syscall_$GOOSARCH.go |gofmt >zsyscall_$GOOSARCH.go"; fi
+		;;
+	esac
+	if [ -n "$mksysctl" ]; then echo "$mksysctl |gofmt >$zsysctl"; fi
+	if [ -n "$mksysnum" ]; then echo "$mksysnum |gofmt >zsysnum_$GOOSARCH.go"; fi
+	if [ -n "$mktypes" ]; then echo "$mktypes types_$GOOS.go |gofmt >ztypes_$GOOSARCH.go"; fi
+) | $run

windows/mkall_windows.bat

@@ -0,0 +1,21 @@
+:: Copyright 2013 The Go Authors. All rights reserved.
+:: Use of this source code is governed by a BSD-style
+:: license that can be found in the LICENSE file.
+@echo off
+
+if exist mkall.sh goto dirok
+echo mkall_windows.bat must be run from src\pkg\syscall directory
+goto :end
+:dirok
+
+if "%1"=="386" goto :paramok
+if "%1"=="amd64" goto :paramok
+echo parameters must be 386 or amd64
+goto :end
+:paramok
+
+go build mksyscall_windows.go
+.\mksyscall_windows syscall_windows.go security_windows.go syscall_windows_%1.go |gofmt >zsyscall_windows_%1.go
+del mksyscall_windows.exe
+
+:end

windows/mksyscall.pl

@@ -0,0 +1,313 @@
+#!/usr/bin/env perl
+# Copyright 2009 The Go Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style
+# license that can be found in the LICENSE file.
+
+# This program reads a file containing function prototypes
+# (like syscall_darwin.go) and generates system call bodies.
+# The prototypes are marked by lines beginning with "//sys"
+# and read like func declarations if //sys is replaced by func, but:
+#	* The parameter lists must give a name for each argument.
+#	  This includes return parameters.
+#	* The parameter lists must give a type for each argument:
+#	  the (x, y, z int) shorthand is not allowed.
+#	* If the return parameter is an error number, it must be named errno.
+
+# A line beginning with //sysnb is like //sys, except that the
+# goroutine will not be suspended during the execution of the system
+# call.  This must only be used for system calls which can never
+# block, as otherwise the system call could cause all goroutines to
+# hang.
+
+use strict;
+
+my $cmdline = "mksyscall.pl " . join(' ', @ARGV);
+my $errors = 0;
+my $_32bit = "";
+my $plan9 = 0;
+my $openbsd = 0;
+my $netbsd = 0;
+my $dragonfly = 0;
+my $nacl = 0;
+my $arm = 0; # 64-bit value should use (even, odd)-pair
+
+if($ARGV[0] eq "-b32") {
+	$_32bit = "big-endian";
+	shift;
+} elsif($ARGV[0] eq "-l32") {
+	$_32bit = "little-endian";
+	shift;
+}
+if($ARGV[0] eq "-plan9") {
+	$plan9 = 1;
+	shift;
+}
+if($ARGV[0] eq "-openbsd") {
+	$openbsd = 1;
+	shift;
+}
+if($ARGV[0] eq "-netbsd") {
+	$netbsd = 1;
+	shift;
+}
+if($ARGV[0] eq "-dragonfly") {
+	$dragonfly = 1;
+	shift;
+}
+if($ARGV[0] eq "-nacl") {
+	$nacl = 1;
+	shift;
+}
+if($ARGV[0] eq "-arm") {
+	$arm = 1;
+	shift;
+}
+
+if($ARGV[0] =~ /^-/) {
+	print STDERR "usage: mksyscall.pl [-b32 | -l32] [file ...]\n";
+	exit 1;
+}
+
+sub parseparamlist($) {
+	my ($list) = @_;
+	$list =~ s/^\s*//;
+	$list =~ s/\s*$//;
+	if($list eq "") {
+		return ();
+	}
+	return split(/\s*,\s*/, $list);
+}
+
+sub parseparam($) {
+	my ($p) = @_;
+	if($p !~ /^(\S*) (\S*)$/) {
+		print STDERR "$ARGV:$.: malformed parameter: $p\n";
+		$errors = 1;
+		return ("xx", "int");
+	}
+	return ($1, $2);
+}
+
+my $text = "";
+while(<>) {
+	chomp;
+	s/\s+/ /g;
+	s/^\s+//;
+	s/\s+$//;
+	my $nonblock = /^\/\/sysnb /;
+	next if !/^\/\/sys / && !$nonblock;
+
+	# Line must be of the form
+	#	func Open(path string, mode int, perm int) (fd int, errno error)
+	# Split into name, in params, out params.
+	if(!/^\/\/sys(nb)? (\w+)\(([^()]*)\)\s*(?:\(([^()]+)\))?\s*(?:=\s*((?i)SYS_[A-Z0-9_]+))?$/) {
+		print STDERR "$ARGV:$.: malformed //sys declaration\n";
+		$errors = 1;
+		next;
+	}
+	my ($func, $in, $out, $sysname) = ($2, $3, $4, $5);
+
+	# Split argument lists on comma.
+	my @in = parseparamlist($in);
+	my @out = parseparamlist($out);
+
+	# Try in vain to keep people from editing this file.
+	# The theory is that they jump into the middle of the file
+	# without reading the header.
+	$text .= "// THIS FILE IS GENERATED BY THE COMMAND AT THE TOP; DO NOT EDIT\n\n";
+
+	# Go function header.
+	my $out_decl = @out ? sprintf(" (%s)", join(', ', @out)) : "";
+	$text .= sprintf "func %s(%s)%s {\n", $func, join(', ', @in), $out_decl;
+
+	# Check if err return available
+	my $errvar = "";
+	foreach my $p (@out) {
+		my ($name, $type) = parseparam($p);
+		if($type eq "error") {
+			$errvar = $name;
+			last;
+		}
+	}
+
+	# Prepare arguments to Syscall.
+	my @args = ();
+	my $n = 0;
+	foreach my $p (@in) {
+		my ($name, $type) = parseparam($p);
+		if($type =~ /^\*/) {
+			push @args, "uintptr(unsafe.Pointer($name))";
+		} elsif($type eq "string" && $errvar ne "") {
+			$text .= "\tvar _p$n *byte\n";
+			$text .= "\t_p$n, $errvar = BytePtrFromString($name)\n";
+			$text .= "\tif $errvar != nil {\n\t\treturn\n\t}\n";
+			push @args, "uintptr(unsafe.Pointer(_p$n))";
+			$n++;
+		} elsif($type eq "string") {
+			print STDERR "$ARGV:$.: $func uses string arguments, but has no error return\n";
+			$text .= "\tvar _p$n *byte\n";
+			$text .= "\t_p$n, _ = BytePtrFromString($name)\n";
+			push @args, "uintptr(unsafe.Pointer(_p$n))";
+			$n++;
+		} elsif($type =~ /^\[\](.*)/) {
+			# Convert slice into pointer, length.
+			# Have to be careful not to take address of &a[0] if len == 0:
+			# pass dummy pointer in that case.
+			# Used to pass nil, but some OSes or simulators reject write(fd, nil, 0).
+			$text .= "\tvar _p$n unsafe.Pointer\n";
+			$text .= "\tif len($name) > 0 {\n\t\t_p$n = unsafe.Pointer(\&${name}[0])\n\t}";
+			$text .= " else {\n\t\t_p$n = unsafe.Pointer(&_zero)\n\t}";
+			$text .= "\n";
+			push @args, "uintptr(_p$n)", "uintptr(len($name))";
+			$n++;
+		} elsif($type eq "int64" && ($openbsd || $netbsd)) {
+			push @args, "0";
+			if($_32bit eq "big-endian") {
+				push @args, "uintptr($name>>32)", "uintptr($name)";
+			} elsif($_32bit eq "little-endian") {
+				push @args, "uintptr($name)", "uintptr($name>>32)";
+			} else {
+				push @args, "uintptr($name)";
+			}
+		} elsif($type eq "int64" && $dragonfly) {
+			if ($func !~ /^extp(read|write)/i) {
+				push @args, "0";
+			}
+			if($_32bit eq "big-endian") {
+				push @args, "uintptr($name>>32)", "uintptr($name)";
+			} elsif($_32bit eq "little-endian") {
+				push @args, "uintptr($name)", "uintptr($name>>32)";
+			} else {
+				push @args, "uintptr($name)";
+			}
+		} elsif($type eq "int64" && $_32bit ne "") {
+			if(@args % 2 && $arm) {
+				# arm abi specifies 64-bit argument uses 
+				# (even, odd) pair
+				push @args, "0"
+			}
+			if($_32bit eq "big-endian") {
+				push @args, "uintptr($name>>32)", "uintptr($name)";
+			} else {
+				push @args, "uintptr($name)", "uintptr($name>>32)";
+			}
+		} else {
+			push @args, "uintptr($name)";
+		}
+	}
+
+	# Determine which form to use; pad args with zeros.
+	my $asm = "Syscall";
+	if ($nonblock) {
+		$asm = "RawSyscall";
+	}
+	if(@args <= 3) {
+		while(@args < 3) {
+			push @args, "0";
+		}
+	} elsif(@args <= 6) {
+		$asm .= "6";
+		while(@args < 6) {
+			push @args, "0";
+		}
+	} elsif(@args <= 9) {
+		$asm .= "9";
+		while(@args < 9) {
+			push @args, "0";
+		}
+	} else {
+		print STDERR "$ARGV:$.: too many arguments to system call\n";
+	}
+
+	# System call number.
+	if($sysname eq "") {
+		$sysname = "SYS_$func";
+		$sysname =~ s/([a-z])([A-Z])/${1}_$2/g;	# turn FooBar into Foo_Bar
+		$sysname =~ y/a-z/A-Z/;
+		if($nacl) {
+			$sysname =~ y/A-Z/a-z/;
+		}
+	}
+
+	# Actual call.
+	my $args = join(', ', @args);
+	my $call = "$asm($sysname, $args)";
+
+	# Assign return values.
+	my $body = "";
+	my @ret = ("_", "_", "_");
+	my $do_errno = 0;
+	for(my $i=0; $i<@out; $i++) {
+		my $p = $out[$i];
+		my ($name, $type) = parseparam($p);
+		my $reg = "";
+		if($name eq "err" && !$plan9) {
+			$reg = "e1";
+			$ret[2] = $reg;
+			$do_errno = 1;
+		} elsif($name eq "err" && $plan9) {
+			$ret[0] = "r0";
+			$ret[2] = "e1";
+			next;
+		} else {
+			$reg = sprintf("r%d", $i);
+			$ret[$i] = $reg;
+		}
+		if($type eq "bool") {
+			$reg = "$reg != 0";
+		}
+		if($type eq "int64" && $_32bit ne "") {
+			# 64-bit number in r1:r0 or r0:r1.
+			if($i+2 > @out) {
+				print STDERR "$ARGV:$.: not enough registers for int64 return\n";
+			}
+			if($_32bit eq "big-endian") {
+				$reg = sprintf("int64(r%d)<<32 | int64(r%d)", $i, $i+1);
+			} else {
+				$reg = sprintf("int64(r%d)<<32 | int64(r%d)", $i+1, $i);
+			}
+			$ret[$i] = sprintf("r%d", $i);
+			$ret[$i+1] = sprintf("r%d", $i+1);
+		}
+		if($reg ne "e1" || $plan9) {
+			$body .= "\t$name = $type($reg)\n";
+		}
+	}
+	if ($ret[0] eq "_" && $ret[1] eq "_" && $ret[2] eq "_") {
+		$text .= "\t$call\n";
+	} else {
+		$text .= "\t$ret[0], $ret[1], $ret[2] := $call\n";
+	}
+	$text .= $body;
+	
+	if ($plan9 && $ret[2] eq "e1") {
+		$text .= "\tif int32(r0) == -1 {\n";
+		$text .= "\t\terr = e1\n";
+		$text .= "\t}\n";
+	} elsif ($do_errno) {
+		$text .= "\tif e1 != 0 {\n";
+		$text .= "\t\terr = e1\n";
+		$text .= "\t}\n";
+	}
+	$text .= "\treturn\n";
+	$text .= "}\n\n";
+}
+
+chomp $text;
+chomp $text;
+
+if($errors) {
+	exit 1;
+}
+
+print <<EOF;
+// $cmdline
+// MACHINE GENERATED BY THE COMMAND ABOVE; DO NOT EDIT
+
+package syscall
+
+import "unsafe"
+
+$text
+EOF
+exit 0;

windows/mksyscall_windows.go

@@ -0,0 +1,698 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build ignore
+
+/*
+mksyscall_windows generates windows system call bodies
+
+It parses all files specified on command line containing function
+prototypes (like syscall_windows.go) and prints system call bodies
+to standard output.
+
+The prototypes are marked by lines beginning with "//sys" and read
+like func declarations if //sys is replaced by func, but:
+
+* The parameter lists must give a name for each argument. This
+  includes return parameters.
+
+* The parameter lists must give a type for each argument:
+  the (x, y, z int) shorthand is not allowed.
+
+* If the return parameter is an error number, it must be named err.
+
+* If go func name needs to be different from it's winapi dll name,
+  the winapi name could be specified at the end, after "=" sign, like
+  //sys LoadLibrary(libname string) (handle uint32, err error) = LoadLibraryA
+
+* Each function that returns err needs to supply a condition, that
+  return value of winapi will be tested against to detect failure.
+  This would set err to windows "last-error", otherwise it will be nil.
+  The value can be provided at end of //sys declaration, like
+  //sys LoadLibrary(libname string) (handle uint32, err error) [failretval==-1] = LoadLibraryA
+  and is [failretval==0] by default.
+
+Usage:
+	mksyscall_windows [flags] [path ...]
+
+The flags are:
+	-trace
+		Generate print statement after every syscall.
+*/
+package main
+
+import (
+	"bufio"
+	"errors"
+	"flag"
+	"fmt"
+	"go/parser"
+	"go/token"
+	"io"
+	"log"
+	"os"
+	"strconv"
+	"strings"
+	"text/template"
+)
+
+var PrintTraceFlag = flag.Bool("trace", false, "generate print statement after every syscall")
+
+func trim(s string) string {
+	return strings.Trim(s, " \t")
+}
+
+var packageName string
+
+func packagename() string {
+	return packageName
+}
+
+func syscalldot() string {
+	if packageName == "syscall" {
+		return ""
+	}
+	return "syscall."
+}
+
+// Param is function parameter
+type Param struct {
+	Name      string
+	Type      string
+	fn        *Fn
+	tmpVarIdx int
+}
+
+// tmpVar returns temp variable name that will be used to represent p during syscall.
+func (p *Param) tmpVar() string {
+	if p.tmpVarIdx < 0 {
+		p.tmpVarIdx = p.fn.curTmpVarIdx
+		p.fn.curTmpVarIdx++
+	}
+	return fmt.Sprintf("_p%d", p.tmpVarIdx)
+}
+
+// BoolTmpVarCode returns source code for bool temp variable.
+func (p *Param) BoolTmpVarCode() string {
+	const code = `var %s uint32
+	if %s {
+		%s = 1
+	} else {
+		%s = 0
+	}`
+	tmp := p.tmpVar()
+	return fmt.Sprintf(code, tmp, p.Name, tmp, tmp)
+}
+
+// SliceTmpVarCode returns source code for slice temp variable.
+func (p *Param) SliceTmpVarCode() string {
+	const code = `var %s *%s
+	if len(%s) > 0 {
+		%s = &%s[0]
+	}`
+	tmp := p.tmpVar()
+	return fmt.Sprintf(code, tmp, p.Type[2:], p.Name, tmp, p.Name)
+}
+
+// StringTmpVarCode returns source code for string temp variable.
+func (p *Param) StringTmpVarCode() string {
+	errvar := p.fn.Rets.ErrorVarName()
+	if errvar == "" {
+		errvar = "_"
+	}
+	tmp := p.tmpVar()
+	const code = `var %s %s
+	%s, %s = %s(%s)`
+	s := fmt.Sprintf(code, tmp, p.fn.StrconvType(), tmp, errvar, p.fn.StrconvFunc(), p.Name)
+	if errvar == "-" {
+		return s
+	}
+	const morecode = `
+	if %s != nil {
+		return
+	}`
+	return s + fmt.Sprintf(morecode, errvar)
+}
+
+// TmpVarCode returns source code for temp variable.
+func (p *Param) TmpVarCode() string {
+	switch {
+	case p.Type == "string":
+		return p.StringTmpVarCode()
+	case p.Type == "bool":
+		return p.BoolTmpVarCode()
+	case strings.HasPrefix(p.Type, "[]"):
+		return p.SliceTmpVarCode()
+	default:
+		return ""
+	}
+}
+
+// SyscallArgList returns source code fragments representing p parameter
+// in syscall. Slices are translated into 2 syscall parameters: pointer to
+// the first element and length.
+func (p *Param) SyscallArgList() []string {
+	var s string
+	switch {
+	case p.Type[0] == '*':
+		s = fmt.Sprintf("unsafe.Pointer(%s)", p.Name)
+	case p.Type == "string":
+		s = fmt.Sprintf("unsafe.Pointer(%s)", p.tmpVar())
+	case p.Type == "bool":
+		s = p.tmpVar()
+	case strings.HasPrefix(p.Type, "[]"):
+		return []string{
+			fmt.Sprintf("uintptr(unsafe.Pointer(%s))", p.tmpVar()),
+			fmt.Sprintf("uintptr(len(%s))", p.Name),
+		}
+	default:
+		s = p.Name
+	}
+	return []string{fmt.Sprintf("uintptr(%s)", s)}
+}
+
+// IsError determines if p parameter is used to return error.
+func (p *Param) IsError() bool {
+	return p.Name == "err" && p.Type == "error"
+}
+
+// join concatenates parameters ps into a string with sep separator.
+// Each parameter is converted into string by applying fn to it
+// before conversion.
+func join(ps []*Param, fn func(*Param) string, sep string) string {
+	if len(ps) == 0 {
+		return ""
+	}
+	a := make([]string, 0)
+	for _, p := range ps {
+		a = append(a, fn(p))
+	}
+	return strings.Join(a, sep)
+}
+
+// Rets describes function return parameters.
+type Rets struct {
+	Name         string
+	Type         string
+	ReturnsError bool
+	FailCond     string
+}
+
+// ErrorVarName returns error variable name for r.
+func (r *Rets) ErrorVarName() string {
+	if r.ReturnsError {
+		return "err"
+	}
+	if r.Type == "error" {
+		return r.Name
+	}
+	return ""
+}
+
+// ToParams converts r into slice of *Param.
+func (r *Rets) ToParams() []*Param {
+	ps := make([]*Param, 0)
+	if len(r.Name) > 0 {
+		ps = append(ps, &Param{Name: r.Name, Type: r.Type})
+	}
+	if r.ReturnsError {
+		ps = append(ps, &Param{Name: "err", Type: "error"})
+	}
+	return ps
+}
+
+// List returns source code of syscall return parameters.
+func (r *Rets) List() string {
+	s := join(r.ToParams(), func(p *Param) string { return p.Name + " " + p.Type }, ", ")
+	if len(s) > 0 {
+		s = "(" + s + ")"
+	}
+	return s
+}
+
+// PrintList returns source code of trace printing part correspondent
+// to syscall return values.
+func (r *Rets) PrintList() string {
+	return join(r.ToParams(), func(p *Param) string { return fmt.Sprintf(`"%s=", %s, `, p.Name, p.Name) }, `", ", `)
+}
+
+// SetReturnValuesCode returns source code that accepts syscall return values.
+func (r *Rets) SetReturnValuesCode() string {
+	if r.Name == "" && !r.ReturnsError {
+		return ""
+	}
+	retvar := "r0"
+	if r.Name == "" {
+		retvar = "r1"
+	}
+	errvar := "_"
+	if r.ReturnsError {
+		errvar = "e1"
+	}
+	return fmt.Sprintf("%s, _, %s := ", retvar, errvar)
+}
+
+func (r *Rets) useLongHandleErrorCode(retvar string) string {
+	const code = `if %s {
+		if e1 != 0 {
+			err = error(e1)
+		} else {
+			err = %sEINVAL
+		}
+	}`
+	cond := retvar + " == 0"
+	if r.FailCond != "" {
+		cond = strings.Replace(r.FailCond, "failretval", retvar, 1)
+	}
+	return fmt.Sprintf(code, cond, syscalldot())
+}
+
+// SetErrorCode returns source code that sets return parameters.
+func (r *Rets) SetErrorCode() string {
+	const code = `if r0 != 0 {
+		%s = %sErrno(r0)
+	}`
+	if r.Name == "" && !r.ReturnsError {
+		return ""
+	}
+	if r.Name == "" {
+		return r.useLongHandleErrorCode("r1")
+	}
+	if r.Type == "error" {
+		return fmt.Sprintf(code, r.Name, syscalldot())
+	}
+	s := ""
+	switch {
+	case r.Type[0] == '*':
+		s = fmt.Sprintf("%s = (%s)(unsafe.Pointer(r0))", r.Name, r.Type)
+	case r.Type == "bool":
+		s = fmt.Sprintf("%s = r0 != 0", r.Name)
+	default:
+		s = fmt.Sprintf("%s = %s(r0)", r.Name, r.Type)
+	}
+	if !r.ReturnsError {
+		return s
+	}
+	return s + "\n\t" + r.useLongHandleErrorCode(r.Name)
+}
+
+// Fn describes syscall function.
+type Fn struct {
+	Name        string
+	Params      []*Param
+	Rets        *Rets
+	PrintTrace  bool
+	dllname     string
+	dllfuncname string
+	src         string
+	// TODO: get rid of this field and just use parameter index instead
+	curTmpVarIdx int // insure tmp variables have uniq names
+}
+
+// extractParams parses s to extract function parameters.
+func extractParams(s string, f *Fn) ([]*Param, error) {
+	s = trim(s)
+	if s == "" {
+		return nil, nil
+	}
+	a := strings.Split(s, ",")
+	ps := make([]*Param, len(a))
+	for i := range ps {
+		s2 := trim(a[i])
+		b := strings.Split(s2, " ")
+		if len(b) != 2 {
+			b = strings.Split(s2, "\t")
+			if len(b) != 2 {
+				return nil, errors.New("Could not extract function parameter from \"" + s2 + "\"")
+			}
+		}
+		ps[i] = &Param{
+			Name:      trim(b[0]),
+			Type:      trim(b[1]),
+			fn:        f,
+			tmpVarIdx: -1,
+		}
+	}
+	return ps, nil
+}
+
+// extractSection extracts text out of string s starting after start
+// and ending just before end. found return value will indicate success,
+// and prefix, body and suffix will contain correspondent parts of string s.
+func extractSection(s string, start, end rune) (prefix, body, suffix string, found bool) {
+	s = trim(s)
+	if strings.HasPrefix(s, string(start)) {
+		// no prefix
+		body = s[1:]
+	} else {
+		a := strings.SplitN(s, string(start), 2)
+		if len(a) != 2 {
+			return "", "", s, false
+		}
+		prefix = a[0]
+		body = a[1]
+	}
+	a := strings.SplitN(body, string(end), 2)
+	if len(a) != 2 {
+		return "", "", "", false
+	}
+	return prefix, a[0], a[1], true
+}
+
+// newFn parses string s and return created function Fn.
+func newFn(s string) (*Fn, error) {
+	s = trim(s)
+	f := &Fn{
+		Rets:       &Rets{},
+		src:        s,
+		PrintTrace: *PrintTraceFlag,
+	}
+	// function name and args
+	prefix, body, s, found := extractSection(s, '(', ')')
+	if !found || prefix == "" {
+		return nil, errors.New("Could not extract function name and parameters from \"" + f.src + "\"")
+	}
+	f.Name = prefix
+	var err error
+	f.Params, err = extractParams(body, f)
+	if err != nil {
+		return nil, err
+	}
+	// return values
+	_, body, s, found = extractSection(s, '(', ')')
+	if found {
+		r, err := extractParams(body, f)
+		if err != nil {
+			return nil, err
+		}
+		switch len(r) {
+		case 0:
+		case 1:
+			if r[0].IsError() {
+				f.Rets.ReturnsError = true
+			} else {
+				f.Rets.Name = r[0].Name
+				f.Rets.Type = r[0].Type
+			}
+		case 2:
+			if !r[1].IsError() {
+				return nil, errors.New("Only last windows error is allowed as second return value in \"" + f.src + "\"")
+			}
+			f.Rets.ReturnsError = true
+			f.Rets.Name = r[0].Name
+			f.Rets.Type = r[0].Type
+		default:
+			return nil, errors.New("Too many return values in \"" + f.src + "\"")
+		}
+	}
+	// fail condition
+	_, body, s, found = extractSection(s, '[', ']')
+	if found {
+		f.Rets.FailCond = body
+	}
+	// dll and dll function names
+	s = trim(s)
+	if s == "" {
+		return f, nil
+	}
+	if !strings.HasPrefix(s, "=") {
+		return nil, errors.New("Could not extract dll name from \"" + f.src + "\"")
+	}
+	s = trim(s[1:])
+	a := strings.Split(s, ".")
+	switch len(a) {
+	case 1:
+		f.dllfuncname = a[0]
+	case 2:
+		f.dllname = a[0]
+		f.dllfuncname = a[1]
+	default:
+		return nil, errors.New("Could not extract dll name from \"" + f.src + "\"")
+	}
+	return f, nil
+}
+
+// DLLName returns DLL name for function f.
+func (f *Fn) DLLName() string {
+	if f.dllname == "" {
+		return "kernel32"
+	}
+	return f.dllname
+}
+
+// DLLName returns DLL function name for function f.
+func (f *Fn) DLLFuncName() string {
+	if f.dllfuncname == "" {
+		return f.Name
+	}
+	return f.dllfuncname
+}
+
+// ParamList returns source code for function f parameters.
+func (f *Fn) ParamList() string {
+	return join(f.Params, func(p *Param) string { return p.Name + " " + p.Type }, ", ")
+}
+
+// ParamPrintList returns source code of trace printing part correspondent
+// to syscall input parameters.
+func (f *Fn) ParamPrintList() string {
+	return join(f.Params, func(p *Param) string { return fmt.Sprintf(`"%s=", %s, `, p.Name, p.Name) }, `", ", `)
+}
+
+// ParamCount return number of syscall parameters for function f.
+func (f *Fn) ParamCount() int {
+	n := 0
+	for _, p := range f.Params {
+		n += len(p.SyscallArgList())
+	}
+	return n
+}
+
+// SyscallParamCount determines which version of Syscall/Syscall6/Syscall9/...
+// to use. It returns parameter count for correspondent SyscallX function.
+func (f *Fn) SyscallParamCount() int {
+	n := f.ParamCount()
+	switch {
+	case n <= 3:
+		return 3
+	case n <= 6:
+		return 6
+	case n <= 9:
+		return 9
+	case n <= 12:
+		return 12
+	case n <= 15:
+		return 15
+	default:
+		panic("too many arguments to system call")
+	}
+}
+
+// Syscall determines which SyscallX function to use for function f.
+func (f *Fn) Syscall() string {
+	c := f.SyscallParamCount()
+	if c == 3 {
+		return syscalldot() + "Syscall"
+	}
+	return syscalldot() + "Syscall" + strconv.Itoa(c)
+}
+
+// SyscallParamList returns source code for SyscallX parameters for function f.
+func (f *Fn) SyscallParamList() string {
+	a := make([]string, 0)
+	for _, p := range f.Params {
+		a = append(a, p.SyscallArgList()...)
+	}
+	for len(a) < f.SyscallParamCount() {
+		a = append(a, "0")
+	}
+	return strings.Join(a, ", ")
+}
+
+// IsUTF16 is true, if f is W (utf16) function. It is false
+// for all A (ascii) functions.
+func (f *Fn) IsUTF16() bool {
+	s := f.DLLFuncName()
+	return s[len(s)-1] == 'W'
+}
+
+// StrconvFunc returns name of Go string to OS string function for f.
+func (f *Fn) StrconvFunc() string {
+	if f.IsUTF16() {
+		return syscalldot() + "UTF16PtrFromString"
+	}
+	return syscalldot() + "BytePtrFromString"
+}
+
+// StrconvType returns Go type name used for OS string for f.
+func (f *Fn) StrconvType() string {
+	if f.IsUTF16() {
+		return "*uint16"
+	}
+	return "*byte"
+}
+
+// Source files and functions.
+type Source struct {
+	Funcs []*Fn
+	Files []string
+}
+
+// ParseFiles parses files listed in fs and extracts all syscall
+// functions listed in  sys comments. It returns source files
+// and functions collection *Source if successful.
+func ParseFiles(fs []string) (*Source, error) {
+	src := &Source{
+		Funcs: make([]*Fn, 0),
+		Files: make([]string, 0),
+	}
+	for _, file := range fs {
+		if err := src.ParseFile(file); err != nil {
+			return nil, err
+		}
+	}
+	return src, nil
+}
+
+// DLLs return dll names for a source set src.
+func (src *Source) DLLs() []string {
+	uniq := make(map[string]bool)
+	r := make([]string, 0)
+	for _, f := range src.Funcs {
+		name := f.DLLName()
+		if _, found := uniq[name]; !found {
+			uniq[name] = true
+			r = append(r, name)
+		}
+	}
+	return r
+}
+
+// ParseFile adds adition file path to a source set src.
+func (src *Source) ParseFile(path string) error {
+	file, err := os.Open(path)
+	if err != nil {
+		return err
+	}
+	defer file.Close()
+
+	s := bufio.NewScanner(file)
+	for s.Scan() {
+		t := trim(s.Text())
+		if len(t) < 7 {
+			continue
+		}
+		if !strings.HasPrefix(t, "//sys") {
+			continue
+		}
+		t = t[5:]
+		if !(t[0] == ' ' || t[0] == '\t') {
+			continue
+		}
+		f, err := newFn(t[1:])
+		if err != nil {
+			return err
+		}
+		src.Funcs = append(src.Funcs, f)
+	}
+	if err := s.Err(); err != nil {
+		return err
+	}
+	src.Files = append(src.Files, path)
+
+	// get package name
+	fset := token.NewFileSet()
+	_, err = file.Seek(0, 0)
+	if err != nil {
+		return err
+	}
+	pkg, err := parser.ParseFile(fset, "", file, parser.PackageClauseOnly)
+	if err != nil {
+		return err
+	}
+	packageName = pkg.Name.Name
+
+	return nil
+}
+
+// Generate output source file from a source set src.
+func (src *Source) Generate(w io.Writer) error {
+	funcMap := template.FuncMap{
+		"syscalldot":  syscalldot,
+		"packagename": packagename,
+	}
+	t := template.Must(template.New("main").Funcs(funcMap).Parse(srcTemplate))
+	err := t.Execute(w, src)
+	if err != nil {
+		return errors.New("Failed to execute template: " + err.Error())
+	}
+	return nil
+}
+
+func usage() {
+	fmt.Fprintf(os.Stderr, "usage: mksyscall_windows [flags] [path ...]\n")
+	flag.PrintDefaults()
+	os.Exit(1)
+}
+
+func main() {
+	flag.Usage = usage
+	flag.Parse()
+	if len(os.Args) <= 1 {
+		fmt.Fprintf(os.Stderr, "no files to parse provided\n")
+		usage()
+	}
+	src, err := ParseFiles(os.Args[1:])
+	if err != nil {
+		log.Fatal(err)
+	}
+	if err := src.Generate(os.Stdout); err != nil {
+		log.Fatal(err)
+	}
+}
+
+// TODO: use println instead to print in the following template
+const srcTemplate = `
+
+{{define "main"}}// go build mksyscall_windows.go && ./mksyscall_windows{{range .Files}} {{.}}{{end}}
+// MACHINE GENERATED BY THE COMMAND ABOVE; DO NOT EDIT
+
+package {{packagename}}
+
+import "unsafe"{{if syscalldot}}
+import "syscall"{{end}}
+
+var (
+{{template "dlls" .}}
+{{template "funcnames" .}})
+{{range .Funcs}}{{template "funcbody" .}}{{end}}
+{{end}}
+
+{{/* help functions */}}
+
+{{define "dlls"}}{{range .DLLs}}	mod{{.}} = {{syscalldot}}NewLazyDLL("{{.}}.dll")
+{{end}}{{end}}
+
+{{define "funcnames"}}{{range .Funcs}}	proc{{.DLLFuncName}} = mod{{.DLLName}}.NewProc("{{.DLLFuncName}}")
+{{end}}{{end}}
+
+{{define "funcbody"}}
+func {{.Name}}({{.ParamList}}) {{if .Rets.List}}{{.Rets.List}} {{end}}{
+{{template "tmpvars" .}}	{{template "syscall" .}}
+{{template "seterror" .}}{{template "printtrace" .}}	return
+}
+{{end}}
+
+{{define "tmpvars"}}{{range .Params}}{{if .TmpVarCode}}	{{.TmpVarCode}}
+{{end}}{{end}}{{end}}
+
+{{define "syscall"}}{{.Rets.SetReturnValuesCode}}{{.Syscall}}(proc{{.DLLFuncName}}.Addr(), {{.ParamCount}}, {{.SyscallParamList}}){{end}}
+
+{{define "seterror"}}{{if .Rets.SetErrorCode}}	{{.Rets.SetErrorCode}}
+{{end}}{{end}}
+
+{{define "printtrace"}}{{if .PrintTrace}}	print("SYSCALL: {{.Name}}(", {{.ParamPrintList}}") (", {{.Rets.PrintList}}")\n")
+{{end}}{{end}}
+
+`

windows/race.go

@@ -0,0 +1,30 @@
+// Copyright 2012 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build race
+
+package syscall
+
+import (
+	"runtime"
+	"unsafe"
+)
+
+const raceenabled = true
+
+func raceAcquire(addr unsafe.Pointer) {
+	runtime.RaceAcquire(addr)
+}
+
+func raceReleaseMerge(addr unsafe.Pointer) {
+	runtime.RaceReleaseMerge(addr)
+}
+
+func raceReadRange(addr unsafe.Pointer, len int) {
+	runtime.RaceReadRange(addr, len)
+}
+
+func raceWriteRange(addr unsafe.Pointer, len int) {
+	runtime.RaceWriteRange(addr, len)
+}

windows/race0.go

@@ -0,0 +1,25 @@
+// Copyright 2012 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build !race
+
+package syscall
+
+import (
+	"unsafe"
+)
+
+const raceenabled = false
+
+func raceAcquire(addr unsafe.Pointer) {
+}
+
+func raceReleaseMerge(addr unsafe.Pointer) {
+}
+
+func raceReadRange(addr unsafe.Pointer, len int) {
+}
+
+func raceWriteRange(addr unsafe.Pointer, len int) {
+}

windows/security_windows.go

@@ -0,0 +1,384 @@
+// Copyright 2012 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall
+
+import (
+	"unsafe"
+)
+
+const (
+	STANDARD_RIGHTS_REQUIRED = 0xf0000
+	STANDARD_RIGHTS_READ     = 0x20000
+	STANDARD_RIGHTS_WRITE    = 0x20000
+	STANDARD_RIGHTS_EXECUTE  = 0x20000
+	STANDARD_RIGHTS_ALL      = 0x1F0000
+)
+
+const (
+	NameUnknown          = 0
+	NameFullyQualifiedDN = 1
+	NameSamCompatible    = 2
+	NameDisplay          = 3
+	NameUniqueId         = 6
+	NameCanonical        = 7
+	NameUserPrincipal    = 8
+	NameCanonicalEx      = 9
+	NameServicePrincipal = 10
+	NameDnsDomain        = 12
+)
+
+// This function returns 1 byte BOOLEAN rather than the 4 byte BOOL.
+// http://blogs.msdn.com/b/drnick/archive/2007/12/19/windows-and-upn-format-credentials.aspx
+//sys	TranslateName(accName *uint16, accNameFormat uint32, desiredNameFormat uint32, translatedName *uint16, nSize *uint32) (err error) [failretval&0xff==0] = secur32.TranslateNameW
+//sys	GetUserNameEx(nameFormat uint32, nameBuffre *uint16, nSize *uint32) (err error) [failretval&0xff==0] = secur32.GetUserNameExW
+
+// TranslateAccountName converts a directory service
+// object name from one format to another.
+func TranslateAccountName(username string, from, to uint32, initSize int) (string, error) {
+	u, e := UTF16PtrFromString(username)
+	if e != nil {
+		return "", e
+	}
+	b := make([]uint16, 50)
+	n := uint32(len(b))
+	e = TranslateName(u, from, to, &b[0], &n)
+	if e != nil {
+		if e != ERROR_INSUFFICIENT_BUFFER {
+			return "", e
+		}
+		// make receive buffers of requested size and try again
+		b = make([]uint16, n)
+		e = TranslateName(u, from, to, &b[0], &n)
+		if e != nil {
+			return "", e
+		}
+	}
+	return UTF16ToString(b), nil
+}
+
+const (
+	// do not reorder
+	NetSetupUnknownStatus = iota
+	NetSetupUnjoined
+	NetSetupWorkgroupName
+	NetSetupDomainName
+)
+
+type UserInfo10 struct {
+	Name       *uint16
+	Comment    *uint16
+	UsrComment *uint16
+	FullName   *uint16
+}
+
+//sys	NetUserGetInfo(serverName *uint16, userName *uint16, level uint32, buf **byte) (neterr error) = netapi32.NetUserGetInfo
+//sys	NetGetJoinInformation(server *uint16, name **uint16, bufType *uint32) (neterr error) = netapi32.NetGetJoinInformation
+//sys	NetApiBufferFree(buf *byte) (neterr error) = netapi32.NetApiBufferFree
+
+const (
+	// do not reorder
+	SidTypeUser = 1 + iota
+	SidTypeGroup
+	SidTypeDomain
+	SidTypeAlias
+	SidTypeWellKnownGroup
+	SidTypeDeletedAccount
+	SidTypeInvalid
+	SidTypeUnknown
+	SidTypeComputer
+	SidTypeLabel
+)
+
+//sys	LookupAccountSid(systemName *uint16, sid *SID, name *uint16, nameLen *uint32, refdDomainName *uint16, refdDomainNameLen *uint32, use *uint32) (err error) = advapi32.LookupAccountSidW
+//sys	LookupAccountName(systemName *uint16, accountName *uint16, sid *SID, sidLen *uint32, refdDomainName *uint16, refdDomainNameLen *uint32, use *uint32) (err error) = advapi32.LookupAccountNameW
+//sys	ConvertSidToStringSid(sid *SID, stringSid **uint16) (err error) = advapi32.ConvertSidToStringSidW
+//sys	ConvertStringSidToSid(stringSid *uint16, sid **SID) (err error) = advapi32.ConvertStringSidToSidW
+//sys	GetLengthSid(sid *SID) (len uint32) = advapi32.GetLengthSid
+//sys	CopySid(destSidLen uint32, destSid *SID, srcSid *SID) (err error) = advapi32.CopySid
+
+// The security identifier (SID) structure is a variable-length
+// structure used to uniquely identify users or groups.
+type SID struct{}
+
+// StringToSid converts a string-format security identifier
+// sid into a valid, functional sid.
+func StringToSid(s string) (*SID, error) {
+	var sid *SID
+	p, e := UTF16PtrFromString(s)
+	if e != nil {
+		return nil, e
+	}
+	e = ConvertStringSidToSid(p, &sid)
+	if e != nil {
+		return nil, e
+	}
+	defer LocalFree((Handle)(unsafe.Pointer(sid)))
+	return sid.Copy()
+}
+
+// LookupSID retrieves a security identifier sid for the account
+// and the name of the domain on which the account was found.
+// System specify target computer to search.
+func LookupSID(system, account string) (sid *SID, domain string, accType uint32, err error) {
+	if len(account) == 0 {
+		return nil, "", 0, EINVAL
+	}
+	acc, e := UTF16PtrFromString(account)
+	if e != nil {
+		return nil, "", 0, e
+	}
+	var sys *uint16
+	if len(system) > 0 {
+		sys, e = UTF16PtrFromString(system)
+		if e != nil {
+			return nil, "", 0, e
+		}
+	}
+	db := make([]uint16, 50)
+	dn := uint32(len(db))
+	b := make([]byte, 50)
+	n := uint32(len(b))
+	sid = (*SID)(unsafe.Pointer(&b[0]))
+	e = LookupAccountName(sys, acc, sid, &n, &db[0], &dn, &accType)
+	if e != nil {
+		if e != ERROR_INSUFFICIENT_BUFFER {
+			return nil, "", 0, e
+		}
+		// make receive buffers of requested size and try again
+		b = make([]byte, n)
+		sid = (*SID)(unsafe.Pointer(&b[0]))
+		db = make([]uint16, dn)
+		e = LookupAccountName(sys, acc, sid, &n, &db[0], &dn, &accType)
+		if e != nil {
+			return nil, "", 0, e
+		}
+	}
+	return sid, UTF16ToString(db), accType, nil
+}
+
+// String converts sid to a string format
+// suitable for display, storage, or transmission.
+func (sid *SID) String() (string, error) {
+	var s *uint16
+	e := ConvertSidToStringSid(sid, &s)
+	if e != nil {
+		return "", e
+	}
+	defer LocalFree((Handle)(unsafe.Pointer(s)))
+	return UTF16ToString((*[256]uint16)(unsafe.Pointer(s))[:]), nil
+}
+
+// Len returns the length, in bytes, of a valid security identifier sid.
+func (sid *SID) Len() int {
+	return int(GetLengthSid(sid))
+}
+
+// Copy creates a duplicate of security identifier sid.
+func (sid *SID) Copy() (*SID, error) {
+	b := make([]byte, sid.Len())
+	sid2 := (*SID)(unsafe.Pointer(&b[0]))
+	e := CopySid(uint32(len(b)), sid2, sid)
+	if e != nil {
+		return nil, e
+	}
+	return sid2, nil
+}
+
+// LookupAccount retrieves the name of the account for this sid
+// and the name of the first domain on which this sid is found.
+// System specify target computer to search for.
+func (sid *SID) LookupAccount(system string) (account, domain string, accType uint32, err error) {
+	var sys *uint16
+	if len(system) > 0 {
+		sys, err = UTF16PtrFromString(system)
+		if err != nil {
+			return "", "", 0, err
+		}
+	}
+	b := make([]uint16, 50)
+	n := uint32(len(b))
+	db := make([]uint16, 50)
+	dn := uint32(len(db))
+	e := LookupAccountSid(sys, sid, &b[0], &n, &db[0], &dn, &accType)
+	if e != nil {
+		if e != ERROR_INSUFFICIENT_BUFFER {
+			return "", "", 0, e
+		}
+		// make receive buffers of requested size and try again
+		b = make([]uint16, n)
+		db = make([]uint16, dn)
+		e = LookupAccountSid(nil, sid, &b[0], &n, &db[0], &dn, &accType)
+		if e != nil {
+			return "", "", 0, e
+		}
+	}
+	return UTF16ToString(b), UTF16ToString(db), accType, nil
+}
+
+const (
+	// do not reorder
+	TOKEN_ASSIGN_PRIMARY = 1 << iota
+	TOKEN_DUPLICATE
+	TOKEN_IMPERSONATE
+	TOKEN_QUERY
+	TOKEN_QUERY_SOURCE
+	TOKEN_ADJUST_PRIVILEGES
+	TOKEN_ADJUST_GROUPS
+	TOKEN_ADJUST_DEFAULT
+
+	TOKEN_ALL_ACCESS = STANDARD_RIGHTS_REQUIRED |
+		TOKEN_ASSIGN_PRIMARY |
+		TOKEN_DUPLICATE |
+		TOKEN_IMPERSONATE |
+		TOKEN_QUERY |
+		TOKEN_QUERY_SOURCE |
+		TOKEN_ADJUST_PRIVILEGES |
+		TOKEN_ADJUST_GROUPS |
+		TOKEN_ADJUST_DEFAULT
+	TOKEN_READ  = STANDARD_RIGHTS_READ | TOKEN_QUERY
+	TOKEN_WRITE = STANDARD_RIGHTS_WRITE |
+		TOKEN_ADJUST_PRIVILEGES |
+		TOKEN_ADJUST_GROUPS |
+		TOKEN_ADJUST_DEFAULT
+	TOKEN_EXECUTE = STANDARD_RIGHTS_EXECUTE
+)
+
+const (
+	// do not reorder
+	TokenUser = 1 + iota
+	TokenGroups
+	TokenPrivileges
+	TokenOwner
+	TokenPrimaryGroup
+	TokenDefaultDacl
+	TokenSource
+	TokenType
+	TokenImpersonationLevel
+	TokenStatistics
+	TokenRestrictedSids
+	TokenSessionId
+	TokenGroupsAndPrivileges
+	TokenSessionReference
+	TokenSandBoxInert
+	TokenAuditPolicy
+	TokenOrigin
+	TokenElevationType
+	TokenLinkedToken
+	TokenElevation
+	TokenHasRestrictions
+	TokenAccessInformation
+	TokenVirtualizationAllowed
+	TokenVirtualizationEnabled
+	TokenIntegrityLevel
+	TokenUIAccess
+	TokenMandatoryPolicy
+	TokenLogonSid
+	MaxTokenInfoClass
+)
+
+type SIDAndAttributes struct {
+	Sid        *SID
+	Attributes uint32
+}
+
+type Tokenuser struct {
+	User SIDAndAttributes
+}
+
+type Tokenprimarygroup struct {
+	PrimaryGroup *SID
+}
+
+//sys	OpenProcessToken(h Handle, access uint32, token *Token) (err error) = advapi32.OpenProcessToken
+//sys	GetTokenInformation(t Token, infoClass uint32, info *byte, infoLen uint32, returnedLen *uint32) (err error) = advapi32.GetTokenInformation
+//sys	GetUserProfileDirectory(t Token, dir *uint16, dirLen *uint32) (err error) = userenv.GetUserProfileDirectoryW
+
+// An access token contains the security information for a logon session.
+// The system creates an access token when a user logs on, and every
+// process executed on behalf of the user has a copy of the token.
+// The token identifies the user, the user's groups, and the user's
+// privileges. The system uses the token to control access to securable
+// objects and to control the ability of the user to perform various
+// system-related operations on the local computer.
+type Token Handle
+
+// OpenCurrentProcessToken opens the access token
+// associated with current process.
+func OpenCurrentProcessToken() (Token, error) {
+	p, e := GetCurrentProcess()
+	if e != nil {
+		return 0, e
+	}
+	var t Token
+	e = OpenProcessToken(p, TOKEN_QUERY, &t)
+	if e != nil {
+		return 0, e
+	}
+	return t, nil
+}
+
+// Close releases access to access token.
+func (t Token) Close() error {
+	return CloseHandle(Handle(t))
+}
+
+// getInfo retrieves a specified type of information about an access token.
+func (t Token) getInfo(class uint32, initSize int) (unsafe.Pointer, error) {
+	b := make([]byte, initSize)
+	var n uint32
+	e := GetTokenInformation(t, class, &b[0], uint32(len(b)), &n)
+	if e != nil {
+		if e != ERROR_INSUFFICIENT_BUFFER {
+			return nil, e
+		}
+		// make receive buffers of requested size and try again
+		b = make([]byte, n)
+		e = GetTokenInformation(t, class, &b[0], uint32(len(b)), &n)
+		if e != nil {
+			return nil, e
+		}
+	}
+	return unsafe.Pointer(&b[0]), nil
+}
+
+// GetTokenUser retrieves access token t user account information.
+func (t Token) GetTokenUser() (*Tokenuser, error) {
+	i, e := t.getInfo(TokenUser, 50)
+	if e != nil {
+		return nil, e
+	}
+	return (*Tokenuser)(i), nil
+}
+
+// GetTokenPrimaryGroup retrieves access token t primary group information.
+// A pointer to a SID structure representing a group that will become
+// the primary group of any objects created by a process using this access token.
+func (t Token) GetTokenPrimaryGroup() (*Tokenprimarygroup, error) {
+	i, e := t.getInfo(TokenPrimaryGroup, 50)
+	if e != nil {
+		return nil, e
+	}
+	return (*Tokenprimarygroup)(i), nil
+}
+
+// GetUserProfileDirectory retrieves path to the
+// root directory of the access token t user's profile.
+func (t Token) GetUserProfileDirectory() (string, error) {
+	b := make([]uint16, 100)
+	n := uint32(len(b))
+	e := GetUserProfileDirectory(t, &b[0], &n)
+	if e != nil {
+		if e != ERROR_INSUFFICIENT_BUFFER {
+			return "", e
+		}
+		// make receive buffers of requested size and try again
+		b = make([]uint16, n)
+		e = GetUserProfileDirectory(t, &b[0], &n)
+		if e != nil {
+			return "", e
+		}
+	}
+	return UTF16ToString(b), nil
+}

windows/str.go

@@ -0,0 +1,20 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall
+
+func itoa(val int) string { // do it here rather than with fmt to avoid dependency
+	if val < 0 {
+		return "-" + itoa(-val)
+	}
+	var buf [32]byte // big enough for int64
+	i := len(buf) - 1
+	for val >= 10 {
+		buf[i] = byte(val%10 + '0')
+		i--
+		val /= 10
+	}
+	buf[i] = byte(val + '0')
+	return string(buf[i:])
+}

windows/syscall.go

@@ -0,0 +1,81 @@
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package syscall contains an interface to the low-level operating system
+// primitives.  The details vary depending on the underlying system, and
+// by default, godoc will display the syscall documentation for the current
+// system.  If you want godoc to display syscall documentation for another
+// system, set $GOOS and $GOARCH to the desired system.  For example, if
+// you want to view documentation for freebsd/arm on linux/amd64, set $GOOS
+// to freebsd and $GOARCH to arm.
+// The primary use of syscall is inside other packages that provide a more
+// portable interface to the system, such as "os", "time" and "net".  Use
+// those packages rather than this one if you can.
+// For details of the functions and data types in this package consult
+// the manuals for the appropriate operating system.
+// These calls return err == nil to indicate success; otherwise
+// err is an operating system error describing the failure.
+// On most systems, that error has type syscall.Errno.
+package syscall
+
+// StringByteSlice is deprecated. Use ByteSliceFromString instead.
+// If s contains a NUL byte this function panics instead of
+// returning an error.
+func StringByteSlice(s string) []byte {
+	a, err := ByteSliceFromString(s)
+	if err != nil {
+		panic("syscall: string with NUL passed to StringByteSlice")
+	}
+	return a
+}
+
+// ByteSliceFromString returns a NUL-terminated slice of bytes
+// containing the text of s. If s contains a NUL byte at any
+// location, it returns (nil, EINVAL).
+func ByteSliceFromString(s string) ([]byte, error) {
+	for i := 0; i < len(s); i++ {
+		if s[i] == 0 {
+			return nil, EINVAL
+		}
+	}
+	a := make([]byte, len(s)+1)
+	copy(a, s)
+	return a, nil
+}
+
+// StringBytePtr is deprecated. Use BytePtrFromString instead.
+// If s contains a NUL byte this function panics instead of
+// returning an error.
+func StringBytePtr(s string) *byte { return &StringByteSlice(s)[0] }
+
+// BytePtrFromString returns a pointer to a NUL-terminated array of
+// bytes containing the text of s. If s contains a NUL byte at any
+// location, it returns (nil, EINVAL).
+func BytePtrFromString(s string) (*byte, error) {
+	a, err := ByteSliceFromString(s)
+	if err != nil {
+		return nil, err
+	}
+	return &a[0], nil
+}
+
+// Single-word zero for use when we need a valid pointer to 0 bytes.
+// See mksyscall.pl.
+var _zero uintptr
+
+func (ts *Timespec) Unix() (sec int64, nsec int64) {
+	return int64(ts.Sec), int64(ts.Nsec)
+}
+
+func (tv *Timeval) Unix() (sec int64, nsec int64) {
+	return int64(tv.Sec), int64(tv.Usec) * 1000
+}
+
+func (ts *Timespec) Nano() int64 {
+	return int64(ts.Sec)*1e9 + int64(ts.Nsec)
+}
+
+func (tv *Timeval) Nano() int64 {
+	return int64(tv.Sec)*1e9 + int64(tv.Usec)*1000
+}

windows/syscall_test.go

@@ -0,0 +1,30 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall_test
+
+import (
+	"syscall"
+	"testing"
+)
+
+func testSetGetenv(t *testing.T, key, value string) {
+	err := syscall.Setenv(key, value)
+	if err != nil {
+		t.Fatalf("Setenv failed to set %q: %v", value, err)
+	}
+	newvalue, found := syscall.Getenv(key)
+	if !found {
+		t.Fatalf("Getenv failed to find %v variable (want value %q)", key, value)
+	}
+	if newvalue != value {
+		t.Fatalf("Getenv(%v) = %q; want %q", key, newvalue, value)
+	}
+}
+
+func TestEnv(t *testing.T) {
+	testSetGetenv(t, "TESTENV", "AVALUE")
+	// make sure TESTENV gets set to "", not deleted
+	testSetGetenv(t, "TESTENV", "")
+}

windows/syscall_windows_386.go

@@ -0,0 +1,5 @@
+// Copyright 2009 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall

windows/syscall_windows_amd64.go

@@ -0,0 +1,5 @@
+// Copyright 2009 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall

windows/syscall_windows_test.go

@@ -0,0 +1,72 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall_test
+
+import (
+	"io/ioutil"
+	"os"
+	"path/filepath"
+	"syscall"
+	"testing"
+)
+
+func TestWin32finddata(t *testing.T) {
+	dir, err := ioutil.TempDir("", "go-build")
+	if err != nil {
+		t.Fatalf("failed to create temp directory: %v", err)
+	}
+	defer os.RemoveAll(dir)
+
+	path := filepath.Join(dir, "long_name.and_extension")
+	f, err := os.Create(path)
+	if err != nil {
+		t.Fatalf("failed to create %v: %v", path, err)
+	}
+	f.Close()
+
+	type X struct {
+		fd  syscall.Win32finddata
+		got byte
+		pad [10]byte // to protect ourselves
+
+	}
+	var want byte = 2 // it is unlikely to have this character in the filename
+	x := X{got: want}
+
+	pathp, _ := syscall.UTF16PtrFromString(path)
+	h, err := syscall.FindFirstFile(pathp, &(x.fd))
+	if err != nil {
+		t.Fatalf("FindFirstFile failed: %v", err)
+	}
+	err = syscall.FindClose(h)
+	if err != nil {
+		t.Fatalf("FindClose failed: %v", err)
+	}
+
+	if x.got != want {
+		t.Fatalf("memory corruption: want=%d got=%d", want, x.got)
+	}
+}
+
+func abort(funcname string, err error) {
+	panic(funcname + " failed: " + err.Error())
+}
+
+func ExampleLoadLibrary() {
+	h, err := syscall.LoadLibrary("kernel32.dll")
+	if err != nil {
+		abort("LoadLibrary", err)
+	}
+	defer syscall.FreeLibrary(h)
+	proc, err := syscall.GetProcAddress(h, "GetVersion")
+	if err != nil {
+		abort("GetProcAddress", err)
+	}
+	r, _, _ := syscall.Syscall(uintptr(proc), 0, 0, 0, 0)
+	major := byte(r)
+	minor := uint8(r >> 8)
+	build := uint16(r >> 16)
+	print("windows version ", major, ".", minor, " (Build ", build, ")\n")
+}

windows/zerrors_windows.go

@@ -0,0 +1,283 @@
+// mkerrors_windows.sh -m32
+// MACHINE GENERATED BY THE COMMAND ABOVE; DO NOT EDIT
+
+package syscall
+
+// Go names for Windows errors.
+const (
+	ENOENT  Errno = ERROR_FILE_NOT_FOUND
+	ENOTDIR Errno = ERROR_PATH_NOT_FOUND
+)
+
+// Windows reserves errors >= 1<<29 for application use.
+const APPLICATION_ERROR = 1 << 29
+
+// Invented values to support what package os and others expects.
+const (
+	E2BIG Errno = APPLICATION_ERROR + iota
+	EACCES
+	EADDRINUSE
+	EADDRNOTAVAIL
+	EADV
+	EAFNOSUPPORT
+	EAGAIN
+	EALREADY
+	EBADE
+	EBADF
+	EBADFD
+	EBADMSG
+	EBADR
+	EBADRQC
+	EBADSLT
+	EBFONT
+	EBUSY
+	ECANCELED
+	ECHILD
+	ECHRNG
+	ECOMM
+	ECONNABORTED
+	ECONNREFUSED
+	ECONNRESET
+	EDEADLK
+	EDEADLOCK
+	EDESTADDRREQ
+	EDOM
+	EDOTDOT
+	EDQUOT
+	EEXIST
+	EFAULT
+	EFBIG
+	EHOSTDOWN
+	EHOSTUNREACH
+	EIDRM
+	EILSEQ
+	EINPROGRESS
+	EINTR
+	EINVAL
+	EIO
+	EISCONN
+	EISDIR
+	EISNAM
+	EKEYEXPIRED
+	EKEYREJECTED
+	EKEYREVOKED
+	EL2HLT
+	EL2NSYNC
+	EL3HLT
+	EL3RST
+	ELIBACC
+	ELIBBAD
+	ELIBEXEC
+	ELIBMAX
+	ELIBSCN
+	ELNRNG
+	ELOOP
+	EMEDIUMTYPE
+	EMFILE
+	EMLINK
+	EMSGSIZE
+	EMULTIHOP
+	ENAMETOOLONG
+	ENAVAIL
+	ENETDOWN
+	ENETRESET
+	ENETUNREACH
+	ENFILE
+	ENOANO
+	ENOBUFS
+	ENOCSI
+	ENODATA
+	ENODEV
+	ENOEXEC
+	ENOKEY
+	ENOLCK
+	ENOLINK
+	ENOMEDIUM
+	ENOMEM
+	ENOMSG
+	ENONET
+	ENOPKG
+	ENOPROTOOPT
+	ENOSPC
+	ENOSR
+	ENOSTR
+	ENOSYS
+	ENOTBLK
+	ENOTCONN
+	ENOTEMPTY
+	ENOTNAM
+	ENOTRECOVERABLE
+	ENOTSOCK
+	ENOTSUP
+	ENOTTY
+	ENOTUNIQ
+	ENXIO
+	EOPNOTSUPP
+	EOVERFLOW
+	EOWNERDEAD
+	EPERM
+	EPFNOSUPPORT
+	EPIPE
+	EPROTO
+	EPROTONOSUPPORT
+	EPROTOTYPE
+	ERANGE
+	EREMCHG
+	EREMOTE
+	EREMOTEIO
+	ERESTART
+	EROFS
+	ESHUTDOWN
+	ESOCKTNOSUPPORT
+	ESPIPE
+	ESRCH
+	ESRMNT
+	ESTALE
+	ESTRPIPE
+	ETIME
+	ETIMEDOUT
+	ETOOMANYREFS
+	ETXTBSY
+	EUCLEAN
+	EUNATCH
+	EUSERS
+	EWOULDBLOCK
+	EXDEV
+	EXFULL
+	EWINDOWS
+)
+
+// Error strings for invented errors
+var errors = [...]string{
+	E2BIG - APPLICATION_ERROR:           "argument list too long",
+	EACCES - APPLICATION_ERROR:          "permission denied",
+	EADDRINUSE - APPLICATION_ERROR:      "address already in use",
+	EADDRNOTAVAIL - APPLICATION_ERROR:   "cannot assign requested address",
+	EADV - APPLICATION_ERROR:            "advertise error",
+	EAFNOSUPPORT - APPLICATION_ERROR:    "address family not supported by protocol",
+	EAGAIN - APPLICATION_ERROR:          "resource temporarily unavailable",
+	EALREADY - APPLICATION_ERROR:        "operation already in progress",
+	EBADE - APPLICATION_ERROR:           "invalid exchange",
+	EBADF - APPLICATION_ERROR:           "bad file descriptor",
+	EBADFD - APPLICATION_ERROR:          "file descriptor in bad state",
+	EBADMSG - APPLICATION_ERROR:         "bad message",
+	EBADR - APPLICATION_ERROR:           "invalid request descriptor",
+	EBADRQC - APPLICATION_ERROR:         "invalid request code",
+	EBADSLT - APPLICATION_ERROR:         "invalid slot",
+	EBFONT - APPLICATION_ERROR:          "bad font file format",
+	EBUSY - APPLICATION_ERROR:           "device or resource busy",
+	ECANCELED - APPLICATION_ERROR:       "operation canceled",
+	ECHILD - APPLICATION_ERROR:          "no child processes",
+	ECHRNG - APPLICATION_ERROR:          "channel number out of range",
+	ECOMM - APPLICATION_ERROR:           "communication error on send",
+	ECONNABORTED - APPLICATION_ERROR:    "software caused connection abort",
+	ECONNREFUSED - APPLICATION_ERROR:    "connection refused",
+	ECONNRESET - APPLICATION_ERROR:      "connection reset by peer",
+	EDEADLK - APPLICATION_ERROR:         "resource deadlock avoided",
+	EDEADLOCK - APPLICATION_ERROR:       "resource deadlock avoided",
+	EDESTADDRREQ - APPLICATION_ERROR:    "destination address required",
+	EDOM - APPLICATION_ERROR:            "numerical argument out of domain",
+	EDOTDOT - APPLICATION_ERROR:         "RFS specific error",
+	EDQUOT - APPLICATION_ERROR:          "disk quota exceeded",
+	EEXIST - APPLICATION_ERROR:          "file exists",
+	EFAULT - APPLICATION_ERROR:          "bad address",
+	EFBIG - APPLICATION_ERROR:           "file too large",
+	EHOSTDOWN - APPLICATION_ERROR:       "host is down",
+	EHOSTUNREACH - APPLICATION_ERROR:    "no route to host",
+	EIDRM - APPLICATION_ERROR:           "identifier removed",
+	EILSEQ - APPLICATION_ERROR:          "invalid or incomplete multibyte or wide character",
+	EINPROGRESS - APPLICATION_ERROR:     "operation now in progress",
+	EINTR - APPLICATION_ERROR:           "interrupted system call",
+	EINVAL - APPLICATION_ERROR:          "invalid argument",
+	EIO - APPLICATION_ERROR:             "input/output error",
+	EISCONN - APPLICATION_ERROR:         "transport endpoint is already connected",
+	EISDIR - APPLICATION_ERROR:          "is a directory",
+	EISNAM - APPLICATION_ERROR:          "is a named type file",
+	EKEYEXPIRED - APPLICATION_ERROR:     "key has expired",
+	EKEYREJECTED - APPLICATION_ERROR:    "key was rejected by service",
+	EKEYREVOKED - APPLICATION_ERROR:     "key has been revoked",
+	EL2HLT - APPLICATION_ERROR:          "level 2 halted",
+	EL2NSYNC - APPLICATION_ERROR:        "level 2 not synchronized",
+	EL3HLT - APPLICATION_ERROR:          "level 3 halted",
+	EL3RST - APPLICATION_ERROR:          "level 3 reset",
+	ELIBACC - APPLICATION_ERROR:         "can not access a needed shared library",
+	ELIBBAD - APPLICATION_ERROR:         "accessing a corrupted shared library",
+	ELIBEXEC - APPLICATION_ERROR:        "cannot exec a shared library directly",
+	ELIBMAX - APPLICATION_ERROR:         "attempting to link in too many shared libraries",
+	ELIBSCN - APPLICATION_ERROR:         ".lib section in a.out corrupted",
+	ELNRNG - APPLICATION_ERROR:          "link number out of range",
+	ELOOP - APPLICATION_ERROR:           "too many levels of symbolic links",
+	EMEDIUMTYPE - APPLICATION_ERROR:     "wrong medium type",
+	EMFILE - APPLICATION_ERROR:          "too many open files",
+	EMLINK - APPLICATION_ERROR:          "too many links",
+	EMSGSIZE - APPLICATION_ERROR:        "message too long",
+	EMULTIHOP - APPLICATION_ERROR:       "multihop attempted",
+	ENAMETOOLONG - APPLICATION_ERROR:    "file name too long",
+	ENAVAIL - APPLICATION_ERROR:         "no XENIX semaphores available",
+	ENETDOWN - APPLICATION_ERROR:        "network is down",
+	ENETRESET - APPLICATION_ERROR:       "network dropped connection on reset",
+	ENETUNREACH - APPLICATION_ERROR:     "network is unreachable",
+	ENFILE - APPLICATION_ERROR:          "too many open files in system",
+	ENOANO - APPLICATION_ERROR:          "no anode",
+	ENOBUFS - APPLICATION_ERROR:         "no buffer space available",
+	ENOCSI - APPLICATION_ERROR:          "no CSI structure available",
+	ENODATA - APPLICATION_ERROR:         "no data available",
+	ENODEV - APPLICATION_ERROR:          "no such device",
+	ENOEXEC - APPLICATION_ERROR:         "exec format error",
+	ENOKEY - APPLICATION_ERROR:          "required key not available",
+	ENOLCK - APPLICATION_ERROR:          "no locks available",
+	ENOLINK - APPLICATION_ERROR:         "link has been severed",
+	ENOMEDIUM - APPLICATION_ERROR:       "no medium found",
+	ENOMEM - APPLICATION_ERROR:          "cannot allocate memory",
+	ENOMSG - APPLICATION_ERROR:          "no message of desired type",
+	ENONET - APPLICATION_ERROR:          "machine is not on the network",
+	ENOPKG - APPLICATION_ERROR:          "package not installed",
+	ENOPROTOOPT - APPLICATION_ERROR:     "protocol not available",
+	ENOSPC - APPLICATION_ERROR:          "no space left on device",
+	ENOSR - APPLICATION_ERROR:           "out of streams resources",
+	ENOSTR - APPLICATION_ERROR:          "device not a stream",
+	ENOSYS - APPLICATION_ERROR:          "function not implemented",
+	ENOTBLK - APPLICATION_ERROR:         "block device required",
+	ENOTCONN - APPLICATION_ERROR:        "transport endpoint is not connected",
+	ENOTEMPTY - APPLICATION_ERROR:       "directory not empty",
+	ENOTNAM - APPLICATION_ERROR:         "not a XENIX named type file",
+	ENOTRECOVERABLE - APPLICATION_ERROR: "state not recoverable",
+	ENOTSOCK - APPLICATION_ERROR:        "socket operation on non-socket",
+	ENOTSUP - APPLICATION_ERROR:         "operation not supported",
+	ENOTTY - APPLICATION_ERROR:          "inappropriate ioctl for device",
+	ENOTUNIQ - APPLICATION_ERROR:        "name not unique on network",
+	ENXIO - APPLICATION_ERROR:           "no such device or address",
+	EOPNOTSUPP - APPLICATION_ERROR:      "operation not supported",
+	EOVERFLOW - APPLICATION_ERROR:       "value too large for defined data type",
+	EOWNERDEAD - APPLICATION_ERROR:      "owner died",
+	EPERM - APPLICATION_ERROR:           "operation not permitted",
+	EPFNOSUPPORT - APPLICATION_ERROR:    "protocol family not supported",
+	EPIPE - APPLICATION_ERROR:           "broken pipe",
+	EPROTO - APPLICATION_ERROR:          "protocol error",
+	EPROTONOSUPPORT - APPLICATION_ERROR: "protocol not supported",
+	EPROTOTYPE - APPLICATION_ERROR:      "protocol wrong type for socket",
+	ERANGE - APPLICATION_ERROR:          "numerical result out of range",
+	EREMCHG - APPLICATION_ERROR:         "remote address changed",
+	EREMOTE - APPLICATION_ERROR:         "object is remote",
+	EREMOTEIO - APPLICATION_ERROR:       "remote I/O error",
+	ERESTART - APPLICATION_ERROR:        "interrupted system call should be restarted",
+	EROFS - APPLICATION_ERROR:           "read-only file system",
+	ESHUTDOWN - APPLICATION_ERROR:       "cannot send after transport endpoint shutdown",
+	ESOCKTNOSUPPORT - APPLICATION_ERROR: "socket type not supported",
+	ESPIPE - APPLICATION_ERROR:          "illegal seek",
+	ESRCH - APPLICATION_ERROR:           "no such process",
+	ESRMNT - APPLICATION_ERROR:          "srmount error",
+	ESTALE - APPLICATION_ERROR:          "stale NFS file handle",
+	ESTRPIPE - APPLICATION_ERROR:        "streams pipe error",
+	ETIME - APPLICATION_ERROR:           "timer expired",
+	ETIMEDOUT - APPLICATION_ERROR:       "connection timed out",
+	ETOOMANYREFS - APPLICATION_ERROR:    "too many references: cannot splice",
+	ETXTBSY - APPLICATION_ERROR:         "text file busy",
+	EUCLEAN - APPLICATION_ERROR:         "structure needs cleaning",
+	EUNATCH - APPLICATION_ERROR:         "protocol driver not attached",
+	EUSERS - APPLICATION_ERROR:          "too many users",
+	EWOULDBLOCK - APPLICATION_ERROR:     "resource temporarily unavailable",
+	EXDEV - APPLICATION_ERROR:           "invalid cross-device link",
+	EXFULL - APPLICATION_ERROR:          "exchange full",
+	EWINDOWS - APPLICATION_ERROR:        "not supported by windows",
+}

windows/zerrors_windows_386.go

@@ -0,0 +1,5 @@
+// Copyright 2011 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall

windows/zerrors_windows_amd64.go

@@ -0,0 +1,5 @@
+// Copyright 2011 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall

windows/zsysnum_windows_386.go

@@ -0,0 +1,3 @@
+// nothing to see here
+
+package syscall

windows/zsysnum_windows_amd64.go

@@ -0,0 +1,3 @@
+// nothing to see here
+
+package syscall

windows/ztypes_windows_386.go

@@ -0,0 +1,22 @@
+// Copyright 2011 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall
+
+type WSAData struct {
+	Version      uint16
+	HighVersion  uint16
+	Description  [WSADESCRIPTION_LEN + 1]byte
+	SystemStatus [WSASYS_STATUS_LEN + 1]byte
+	MaxSockets   uint16
+	MaxUdpDg     uint16
+	VendorInfo   *byte
+}
+
+type Servent struct {
+	Name    *byte
+	Aliases **byte
+	Port    uint16
+	Proto   *byte
+}

windows/ztypes_windows_amd64.go

@@ -0,0 +1,22 @@
+// Copyright 2011 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package syscall
+
+type WSAData struct {
+	Version      uint16
+	HighVersion  uint16
+	MaxSockets   uint16
+	MaxUdpDg     uint16
+	VendorInfo   *byte
+	Description  [WSADESCRIPTION_LEN + 1]byte
+	SystemStatus [WSASYS_STATUS_LEN + 1]byte
+}
+
+type Servent struct {
+	Name    *byte
+	Aliases **byte
+	Proto   *byte
+	Port    uint16
+}