Manually address specific powertop tunables on G14

chrootInstall.sh

@@ -148,11 +148,11 @@ chown -R "$username":users /home/"$username"/.config/autostart /home/"$username"
 # asus g14 2020 configuration
 if [ "$formfactor" == 1 ]; then
     echo 'options snd_hda_intel power_save=1' > /etc/modprobe.d/audio_powersave.conf
-    echo 'vm.dirty_writeback_centisecs = 6000' > /etc/sysctl.d/dirty.conf
+    curl https://raw.githubusercontent.com/rwinkhart/artix-install-script/main/programs/g14-tunables/30-tunables.start -o /etc/local.d/30-tunables.start
-    curl https://raw.githubusercontent.com/rwinkhart/artix-install-script/main/programs/bashpower-g14/15-bashpower.start -o /etc/local.d/15-bashpower.start
+    curl https://raw.githubusercontent.com/rwinkhart/artix-install-script/main/programs/g14-bashpower/15-bashpower.start -o /etc/local.d/15-bashpower.start
     curl https://raw.githubusercontent.com/rwinkhart/artix-install-script/main/programs/NVIDIA-FCKR/NVIDIA-FCKR -o /usr/local/bin/NVIDIA-FCKR
     pacman -S mesa vulkan-icd-loader vulkan-radeon libva-mesa-driver libva-utils acpi_call --needed --noconfirm
-    chmod 755 /etc/local.d/15-bashpower.start /usr/local/bin/NVIDIA-FCKR
+    chmod 755 /etc/local.d/15-bashpower.start /etc/local.d/30-tunables.start /usr/local/bin/NVIDIA-FCKR
     NVIDIA-FCKR integrated
 fi
 

install.sh

@@ -3,7 +3,7 @@
 loadkeys us
 echo ----------------------------------------------------------------------------------------------
 echo rwinkhart\'s artix install script
-echo last updated february 16, 2024 \(rev. C\)
+echo last updated february 16, 2024 \(rev. D\)
 echo ----------------------------------------------------------------------------------------------
 echo You will be asked some questions before installation.
 echo -e "----------------------------------------------------------------------------------------------\n"

programs/g14-tunables/30-tunables.start

@@ -0,0 +1,28 @@
+#!/bin/sh
+echo '6000' > '/proc/sys/vm/dirty_writeback_centisecs'
+echo 'auto' > '/sys/bus/i2c/devices/i2c-4/device/power/control'
+echo 'auto' > '/sys/bus/i2c/devices/i2c-1/device/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.5/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.1/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:14.3/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:04:00.3/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:01.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:02:00.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:05:00.1/ata2/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:05:00.1/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:04:00.5/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.3/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:08.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:04:00.4/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:00.2/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.6/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.4/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.2/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:05:00.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:05:00.0/ata1/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:04:00.2/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:00.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:02.0/power/control'
+echo 'auto' > '/sys/bus/pci/devices/0000:00:18.7/power/control'
+iw dev wlan0 set power_save off