Initial file upload commit (not yet usable)

README.md

@@ -0,0 +1,25 @@
+# Overview
+An Artix Linux installation script that can be used to install and configure Artix Linux with my preferred setup.
+
+Some major/noteworthy differences from common configurations:
+
+- opendoas is used in place of sudo
+- pipewire is used in place of pulseaudio
+- EXT4 fast_commit mode is enabled by default
+- makepkg is configured with better compression algorithms than the defaults and is forced to use all cores
+
+# Usage
+Upon loading up the official Artic base ISO, logging in, switching to the root user, and connecting to the internet, run:
+
+```
+curl https://raw.githubusercontent.com/rwinkhart/artix-install-script/main/install.sh -o install.sh
+chmod +x install.sh
+./install.sh
+```
+
+After running the script, it will ask you some questions about your desired configuration. Answer them and then the installation will complete automatically.
+
+# Supported Devices
+Generic:
+
+- Most x86_64 desktops, laptops, and servers

chrootInstall.sh

@@ -0,0 +1,128 @@
+#!/bin/bash
+
+# Importing Variables
+formfactor="$(cat /tempfiles/formfactor)"
+cpu="$(cat /tempfiles/cpu)"
+gpu="$(cat /tempfiles/gpu)"
+intel_vaapi_driver="$(cat /tempfiles/intel_vaapi_driver)"
+boot="$(cat /tempfiles/boot)"
+disk="$(cat /tempfiles/disk)"
+username="$(cat /tempfiles/username)"
+userpassword="$(cat /tempfiles/userpassword)"
+rootpassword="$(cat /tempfiles/rootpassword)"
+
+# configuring locale and clock Settings
+echo 'en_US.UTF-8 UTF-8' > /etc/locale.gen
+echo 'LANG=en_US.UTF-8' > /etc/locale.conf
+ln -s /usr/share/zoneinfo/America/"$timezone" /etc/localtime
+locale-gen
+hwclock --systohc --utc
+
+# networkmanager configuration 
+pacman -S networkmanager-openrc
+rc-update add NetworkManager
+
+# makepkg configuration
+curl https://raw.githubusercontent.com/rwinkhart/universal-arch-install-script/main/config-files/x86_64/makepkg.conf -o /etc/makepkg.conf
+
+# bootloader installation and configuration
+pacman -S grub efibootmgr os-prober mtools dosfstools --noconfirm
+if [ "$boot" == 1 ]; then
+    grub-install --target=x86_64-efi --bootloader-id=GRUB-rwinkhart --recheck
+fi
+if [ "$boot" == 2 ]; then
+    grub-install --target=i386-pc "$disk"
+fi
+cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
+if [ "$gpu" != 'NVIDIA' ]; then
+    curl https://raw.githubusercontent.com/rwinkhart/universal-arch-install-script/main/config-files/x86_64/grub -o /etc/default/grub
+else
+    curl https://raw.githubusercontent.com/rwinkhart/universal-arch-install-script/main/config-files/x86_64/grub-nvidia -o /etc/default/grub
+fi
+grub-mkconfig -o /boot/grub/grub.cfg
+
+# account setup
+groupadd classmod
+echo "$rootpassword
+$rootpassword
+" | passwd
+useradd -m -g users -G classmod "$username"
+echo "$userpassword
+$userpassword
+" | passwd "$username"
+
+# opendoas configuration
+echo "permit persist keepenv $username as root" > /etc/doas.conf
+ln -s /usr/bin/doas /usr/bin/sudo
+
+# pacman configuration
+curl https://raw.githubusercontent.com/rwinkhart/arch-install-script/main/config-files/universal/paccache-clean-hook -o /etc/pacman.d/hooks/paccache-clean.hook
+if [ "$gpu" == 'NVIDIA' ]; then
+    curl https://raw.githubusercontent.com/rwinkhart/universal-arch-install-script/main/config-files/x86_64/nvidia-hook -o /etc/pacman.d/hooks/nvidia.hook
+fi
+
+# installing hardware-specific packages
+if [ "$cpu" == 'AuthenticAMD' ]; then
+    pacman -S amd-ucode --noconfirm
+else
+    pacman -S intel-ucode --noconfirm
+fi
+if [ "$gpu" == 'AMD' ]; then
+    pacman -S mesa vulkan-icd-loader vulkan-radeon libva-mesa-driver libva-utils --needed --noconfirm
+elif [ "$gpu" == 'Intel' ]; then
+    pacman -S mesa vulkan-icd-loader vulkan-intel --needed --noconfirm
+    if [ "$intel_vaapi_driver" == 1 ]; then
+        pacman -S libva-intel-driver libva-utils --needed --noconfirm
+    fi
+    if [ "$intel_vaapi_driver" == 2 ]; then
+        pacman -S intel-media-driver libva-utils --needed --noconfirm
+    fi
+elif [ "$gpu" == 'NVIDIA' ]; then
+    pacman -S nvidia nvidia-utils nvidia-settings vulkan-icd-loader --needed --noconfirm
+    echo 'options nvidia "NVreg_DynamicPowerManagement=0x02"' > /etc/modprobe.d/nvidia.conf
+    echo 'options nvidia-drm modeset=1' > /etc/modprobe.d/zz-nvidia-modeset.conf
+fi
+
+# disable kernel watchdog
+echo 'blacklist iTCO_wdt' > /etc/modprobe.d/blacklist.conf
+
+if [ "$formfactor" == 1 ]; then
+    pacman -R xorg-xbacklight --noconfirm
+    pacman -S powertop acpid-openrc acpilight --needed --noconfirm
+    rc-update add acpid
+    echo 'SUBSYSTEM=="backlight", ACTION=="add", \
+        RUN+="/bin/chgrp classmod /sys/class/backlight/%k/brightness", \
+        RUN+="/bin/chmod g+w /sys/class/backlight/%k/brightness"
+    ' > /etc/udev/rules.d/screenbacklight.rules
+fi
+
+# setting home directory permissions
+chmod -R 700 /home
+
+# installing desktop environment and addons + utilities
+if [ "$formfactor" -lt 3 ] || [ "$formfactor" == 4 ]; then
+    pacman -S pipewire pipewire-pulse pipewire-jack pipewire-alsa plasma-desktop sddm-openrc sddm-kcm kscreen kdeplasma-addons spectacle gwenview plasma-nm plasma-pa breeze-gtk kde-gtk-config kio-extras khotkeys kwalletmanager pcmanfm-qt yakuake ark kate bluedevil bluez --needed --noconfirm
+    rc-update add sddm
+fi
+
+# installing and configuring basic software packages
+if [ "$formfactor" == 3 ]; then
+    pacman -S openssh --needed --noconfirm
+    mkdir /home/"$username"/.ssh
+    touch /home/"$username"/.ssh/authorized_keys
+    chmod 700 /home/"$username"/.ssh
+    chmod 600 /home/"$username"/.ssh/authorized_keys
+    chown -R "$username" /home/"$username"/.ssh
+fi
+echo -e '*        hard    memlock        64\n*        soft    memlock        2097152\n# End of file' > /etc/security/limits.conf  # increases hard memlock limit to 2 GiB (useful for some apps, such as rpcs3)
+mkdir -p /home/"$username"/.gnupg
+echo 'pinentry-program /usr/bin/pinentry-tty' > /home/"$username"/.gnupg/gpg-agent.conf  # forces gpg prompts to use terminal input
+pacman -S neofetch htop cpupower --needed --noconfirm
+
+# finishing up + cleaning
+rm -rf /chrootInstall.sh /tempfiles
+echo -e "\n---------------------------------------------------------"
+echo installation completed!
+echo please poweroff and remove the installation media before powering back on.
+echo -e "---------------------------------------------------------\n"
+exit

config-files/grub

@@ -0,0 +1,57 @@
+# GRUB boot loader configuration - Universal-ish Arch Installer 05/07/2022
+
+GRUB_DEFAULT="Advanced options for Arch Linux>Arch Linux, with Linux linux"
+GRUB_TIMEOUT=0
+GRUB_DISTRIBUTOR="Arch"
+GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet nowatchdog mem_sleep_default=deep"
+GRUB_CMDLINE_LINUX=""
+
+# Preload both GPT and MBR modules so that they are not missed
+GRUB_PRELOAD_MODULES="part_gpt part_msdos"
+
+# Uncomment to enable booting from LUKS encrypted devices
+#GRUB_ENABLE_CRYPTODISK=y
+
+# Set to 'countdown' or 'hidden' to change timeout behavior,
+# press ESC key to display menu.
+GRUB_TIMEOUT_STYLE=menu
+
+# Uncomment to use basic console
+GRUB_TERMINAL_INPUT=console
+
+# Uncomment to disable graphical terminal
+#GRUB_TERMINAL_OUTPUT=console
+
+# The resolution used on graphical terminal
+# note that you can use only modes which your graphic card supports via VBE
+# you can see them in real GRUB with the command `vbeinfo'
+GRUB_GFXMODE=auto
+
+# Uncomment to allow the kernel use the same resolution used by grub
+GRUB_GFXPAYLOAD_LINUX=keep
+
+# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
+# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
+#GRUB_DISABLE_LINUX_UUID=true
+
+# Uncomment to disable generation of recovery mode menu entries
+GRUB_DISABLE_RECOVERY=true
+
+# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
+# modes only.  Entries specified as foreground/background.
+#GRUB_COLOR_NORMAL="light-blue/black"
+#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
+
+# Uncomment one of them for the gfx desired, a image background or a gfxtheme
+#GRUB_BACKGROUND="/path/to/wallpaper"
+#GRUB_THEME="/path/to/gfxtheme"
+
+# Uncomment to get a beep at GRUB start
+#GRUB_INIT_TUNE="480 440 1"
+
+# Uncomment to make GRUB remember the last selection. This requires
+# setting 'GRUB_DEFAULT=saved' above.
+#GRUB_SAVEDEFAULT=true
+
+# Uncomment to disable submenus in boot menu
+#GRUB_DISABLE_SUBMENU=y

config-files/grub-nvidia

@@ -0,0 +1,57 @@
+# GRUB boot loader configuration - Universal-ish Arch Installer 05/07/2022
+
+GRUB_DEFAULT="Advanced options for Arch Linux>Arch Linux, with Linux linux"
+GRUB_TIMEOUT=0
+GRUB_DISTRIBUTOR="Arch"
+GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet nowatchdog mem_sleep_default=deep nvidia-drm.modeset=1"
+GRUB_CMDLINE_LINUX=""
+
+# Preload both GPT and MBR modules so that they are not missed
+GRUB_PRELOAD_MODULES="part_gpt part_msdos"
+
+# Uncomment to enable booting from LUKS encrypted devices
+#GRUB_ENABLE_CRYPTODISK=y
+
+# Set to 'countdown' or 'hidden' to change timeout behavior,
+# press ESC key to display menu.
+GRUB_TIMEOUT_STYLE=menu
+
+# Uncomment to use basic console
+GRUB_TERMINAL_INPUT=console
+
+# Uncomment to disable graphical terminal
+#GRUB_TERMINAL_OUTPUT=console
+
+# The resolution used on graphical terminal
+# note that you can use only modes which your graphic card supports via VBE
+# you can see them in real GRUB with the command `vbeinfo'
+GRUB_GFXMODE=auto
+
+# Uncomment to allow the kernel use the same resolution used by grub
+GRUB_GFXPAYLOAD_LINUX=keep
+
+# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
+# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
+#GRUB_DISABLE_LINUX_UUID=true
+
+# Uncomment to disable generation of recovery mode menu entries
+GRUB_DISABLE_RECOVERY=true
+
+# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
+# modes only.  Entries specified as foreground/background.
+#GRUB_COLOR_NORMAL="light-blue/black"
+#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
+
+# Uncomment one of them for the gfx desired, a image background or a gfxtheme
+#GRUB_BACKGROUND="/path/to/wallpaper"
+#GRUB_THEME="/path/to/gfxtheme"
+
+# Uncomment to get a beep at GRUB start
+#GRUB_INIT_TUNE="480 440 1"
+
+# Uncomment to make GRUB remember the last selection. This requires
+# setting 'GRUB_DEFAULT=saved' above.
+#GRUB_SAVEDEFAULT=true
+
+# Uncomment to disable submenus in boot menu
+#GRUB_DISABLE_SUBMENU=y

config-files/makepkg.conf

@@ -0,0 +1,158 @@
+#!/hint/bash
+#
+# /etc/makepkg.conf - Universal-ish Arch Installer 12/14/2021
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+#  Format: 'protocol::agent'
+DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
+          'ftp::/usr/bin/curl -qgfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
+          'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/wget
+
+#-- The package required by makepkg to download VCS sources
+#  Format: 'protocol::package'
+VCSCLIENTS=('bzr::bzr'
+            'fossil::fossil'
+            'git::git'
+            'hg::mercurial'
+            'svn::subversion')
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="x86_64"
+CHOST="x86_64-pc-linux-gnu"
+
+#-- Compiler and Linker Flags
+#CPPFLAGS=""
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
+        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+#RUSTFLAGS="-C opt-level=2"
+#-- Make Flags: change this for DistCC/SMP systems
+MAKEFLAGS="-j$(nproc)"
+#-- Debugging flags
+DEBUG_CFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+#DEBUG_RUSTFLAGS="-C debuginfo=2"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
+#  A negated environment option will do the opposite of the comments below.
+#
+#-- distcc:   Use the Distributed C/C++/ObjC compiler
+#-- color:    Colorize output messages
+#-- ccache:   Use ccache to cache compilation
+#-- check:    Run the check() function if present in the PKGBUILD
+#-- sign:     Generate PGP signature file
+#
+BUILDENV=(!distcc color !ccache check !sign)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+#
+#-- Specify a directory for package building.
+#BUILDDIR=/tmp/makepkg
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+#   These are default values for the options=() settings
+#########################################################################
+#
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
+#  A negated option will do the opposite of the comments below.
+#
+#-- strip:      Strip symbols from binaries/libraries
+#-- docs:       Save doc directories specified by DOC_DIRS
+#-- libtool:    Leave libtool (.la) files in packages
+#-- staticlibs: Leave static library (.a) files in packages
+#-- emptydirs:  Leave empty directories in packages
+#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge:      Remove files specified by PURGE_TARGETS
+#-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
+#
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug !lto)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
+INTEGRITY_CHECK=(sha256)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+#-- Directory to store source code in for debug packages
+DBGSRCDIR="/usr/src/debug"
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Log files: specify a fixed directory where all log files will be placed
+#LOGDEST=/home/makepkglogs
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john@doe.com>"
+#-- Specify a key to use for package signing
+#GPGKEY=""
+
+#########################################################################
+# COMPRESSION DEFAULTS
+#########################################################################
+#
+COMPRESSGZ=(pigz -c -f -n)
+COMPRESSBZ2=(pbzip2 -c -f)
+COMPRESSXZ=(xz -c -z --threads=0 -)
+COMPRESSZST=(zstd -c -z -q --threads=0 -)
+COMPRESSLRZ=(lrzip -q)
+COMPRESSLZO=(lzop -q)
+COMPRESSZ=(compress -c -f)
+COMPRESSLZ4=(lz4 -q)
+COMPRESSLZ=(lzip -c -f)
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+PKGEXT='.pkg.tar.zst'
+SRCEXT='.src.tar.gz'
+
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()

config-files/nvidia-hook

@@ -0,0 +1,15 @@
+[Trigger]
+Operation=Install
+Operation=Upgrade
+Operation=Remove
+Type=Package
+Target=nvidia
+Target=linux
+# Change the linux part above and in the Exec line if a different kernel is used
+
+[Action]
+Description=Update Nvidia module in initcpio
+Depends=mkinitcpio
+When=PostTransaction
+NeedsTargets
+Exec=/bin/sh -c 'while read -r trg; do case $trg in linux) exit 0; esac; done; /usr/bin/mkinitcpio -P'

config-files/nvidia-hook-lts

@@ -0,0 +1,15 @@
+[Trigger]
+Operation=Install
+Operation=Upgrade
+Operation=Remove
+Type=Package
+Target=nvidia-lts
+Target=linux-lts
+# Change the linux part above and in the Exec line if a different kernel is used
+
+[Action]
+Description=Update Nvidia module in initcpio
+Depends=mkinitcpio
+When=PostTransaction
+NeedsTargets
+Exec=/bin/sh -c 'while read -r trg; do case $trg in linux-lts) exit 0; esac; done; /usr/bin/mkinitcpio -P'

config-files/paccache-clean-hook

@@ -0,0 +1,11 @@
+[Trigger]
+Operation = Remove
+Operation = Install
+Operation = Upgrade
+Type = Package
+Target = *
+
+[Action]
+Description = Keep the last cache and the currently installed.
+When = PostTransaction
+Exec = /usr/bin/paccache -rvk2

config-files/pacman.conf

@@ -0,0 +1,100 @@
+#
+# /etc/pacman.conf - Universal-ish Arch Installer 12/14/2021
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+Color
+#NoProgressBar
+CheckSpace
+#VerbosePkgLists
+#ParallelDownloads = 5
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

config-files/pacman.conf-g14

@@ -0,0 +1,104 @@
+#
+# /etc/pacman.conf - Universal-ish Arch Installer 12/14/2021
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+Color
+#NoProgressBar
+CheckSpace
+#VerbosePkgLists
+#ParallelDownloads = 5
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+[g14]
+SigLevel = DatabaseNever Optional TrustAll
+Server = https://arch.asus-linux.org
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

config-files/paru.conf

@@ -0,0 +1,38 @@
+#
+# $PARU_CONF - Universal-ish Arch Installer 12/14/2021
+# /etc/paru.conf
+# ~/.config/paru/paru.conf
+#
+# See the paru.conf(5) manpage for options
+
+#
+# GENERAL OPTIONS
+#
+[options]
+PgpFetch
+Devel
+Provides
+DevelSuffixes = -git -cvs -svn -bzr -darcs -always -hg
+#AurOnly
+BottomUp
+#RemoveMake
+#SudoLoop
+#UseAsk
+#SaveChanges
+#CombinedUpgrade
+#CleanAfter
+#UpgradeMenu
+#NewsOnUpgrade
+
+#LocalRepo
+#Chroot
+#Sign
+#SignDb
+
+#
+# Binary OPTIONS
+#
+#[bin]
+#FileManager = vifm
+#MFlags = --skippgpcheck
+#Sudo = doas

install.sh

@@ -0,0 +1,174 @@
+#!/bin/bash
+loadkeys us
+echo ----------------------------------------------------------------------------------------------
+echo rwinkhart\'s artix installer
+echo last updated june 25, 2022
+echo ----------------------------------------------------------------------------------------------
+echo You will be asked some questions before installation.
+echo -e "----------------------------------------------------------------------------------------------\n"
+read -n 1 -s -r -p 'Press any key to continue'
+
+# start questions
+echo Special Devices:
+echo -e '\nspecial devices:\n1. asus rog zephyrus g14 2020\ngeneric:\n2. laptop\n3. desktop\n4. server\n'
+read -n 1 -r -p "formfactor: " formfactor
+
+fdisk -l
+read -r -p "disk: " disk
+
+read -r -p "swap (in GB): " swap
+
+read -n 1 -r -p "clean install? (y/N) " wipe
+
+read -r -p "username: " username
+
+read -r -p "$username password: " userpassword
+
+read -r -p "root password: " rootpassword
+
+read -r -p "hostname: " hostname
+# stop questions
+
+# start hardware detection
+cpu=$(lscpu | grep 'Vendor ID:' | awk 'FNR == 1 {print $3;}')
+gpu=$(lspci | grep 'VGA compatible controller:' | awk 'FNR == 1 {print $5;}')
+# stop hardware detection
+
+# start conditional questions
+if [ "$gpu" == 'Intel' ]; then
+    echo -e '1. libva-intel-driver (intel igpus up to coffee lake)\n2. intel-media-driver (intel igpus/dgpus newer than coffee lake)\n'
+    read -n 1 -r -p "va-api driver: " intel_vaapi_driver
+fi
+# stop conditional questions
+
+# start variable manipulation
+wipe=$(echo "$wipe" | tr '[:upper:]' '[:lower:]')
+username=$(echo "$username" | tr '[:upper:]' '[:lower:]')
+hostname=$(echo "$hostname" | tr '[:upper:]' '[:lower:]')
+
+disk0=$disk
+if [[ "$disk" == /dev/nvme0n* ]]; then
+    disk="$disk"'p'
+fi
+if [[ "$disk" == /dev/mmcblk* ]]; then
+    disk="$disk"'p'
+fi
+# stop variable manipulation
+
+# determine if running as UEFI or BIOS
+if [ -d "/sys/firmware/efi" ]; then
+    boot=1
+else
+    boot=2
+fi
+
+# start partitioning
+if [ "$boot" == 1 ]; then
+    # gpt/uefi partitioning
+    if [ "$wipe" == y ]; then
+        partitions=0
+        echo "g
+        n
+        1
+
+        +256M
+        t
+        1
+        n
+
+
+
+        w
+        " | fdisk -w always -W always "$disk0"
+    else
+        partitions=$(lsblk "$disk0" -o NAME | grep -o '.$' | tail -1)
+        echo "n
+
+
+        +256M
+        t
+
+        1
+        n
+
+
+
+        w
+        " | fdisk -W always "$disk0"
+    fi
+
+    # disk formatting
+    mkfs.fat -F32 "$disk""$((1 + "$partitions"))"
+    mkfs.ext4 -O fast_commit "$disk""$((2 + "$partitions"))"
+
+    # mounting storage and efi partitions
+    mount "$disk""$((2 + "$partitions"))" /mnt
+    mkdir -p /mnt/{boot/EFI,etc}
+    mount "$disk""$((1 + "$partitions"))" /mnt/boot/EFI
+else
+    # mbr/bios partitioning
+    if [ "$wipe" == y ]; then
+        partitions=0
+        echo "o
+        n
+        p
+
+
+
+        w
+        " | fdisk -w always -W always "$disk0"
+    else
+        partitions=$(lsblk "$disk0" -o NAME | grep -o '.$' | tail -1)
+        echo "n
+        p
+
+
+
+        w
+        " | fdisk -W always "$disk0"
+    fi
+
+    # disk formatting
+    mkfs.ext4 -O fast_commit "$disk""$((1 + "$partitions"))"
+
+    # mounting storage (no efi partition, using dos label)
+    mount "$disk""$((1 + "$partitions"))" /mnt
+    mkdir /mnt/etc
+fi
+
+# create and mount swap file
+if [ "$swap" != 0 ]; then
+    dd if=/dev/zero of=/mnt/swapfile bs=1G count="$swap" status=progress
+    chmod 600 /mnt/swapfile
+    mkswap /mnt/swapfile
+    swapon /mnt/swapfile
+fi
+
+fstabgen -U /mnt >> /mnt/etc/fstab
+# stop partitioning
+
+# setting hostname
+echo "$hostname" > /mnt/etc/hostname
+
+# installing base packages
+base_devel='autoconf automake binutils bison fakeroot file findutils flex gawk gcc gettext grep groff pigz pbzip2 libtool m4 make pacman patch pkgconf sed opendoas texinfo which'
+if [ "$formfactor" -lt 3 ]; then
+basestrap /mnt base $base_devel openrc elogind-openrc linux linux-firmware
+fi
+
+# exporting variables
+mkdir /mnt/tempfiles
+echo "$formfactor" > /mnt/tempfiles/formfactor
+echo "$cpu" > /mnt/tempfiles/cpu
+echo "$gpu" > /mnt/tempfiles/gpu
+echo "$intel_vaapi_driver" > /mnt/tempfiles/intel_vaapi_driver
+echo "$boot" > /mnt/tempfiles/boot
+echo "$disk0" > /mnt/tempfiles/disk
+echo "$username" > /mnt/tempfiles/username
+echo "$userpassword" > /mnt/tempfiles/userpassword
+echo "$rootpassword" > /mnt/tempfiles/rootpassword
+
+# download and initiate part 2
+curl https://raw.githubusercontent.com/rwinkhart/universal-arch-install-script/main/universal/secondInstall.sh -o /mnt/chrootInstall.sh
+chmod +x /mnt/chrootInstall.sh
+artix-chroot /mnt ./chrootInstall.sh